首页 | 本学科首页   官方微博 | 高级检索  
     检索      

喷管收敛段与喉部型面对喷管流量的影响
引用本文:陈林泉,李岩芳,侯晓,董新刚.喷管收敛段与喉部型面对喷管流量的影响[J].固体火箭技术,2002,25(1):10-11,19.
作者姓名:陈林泉  李岩芳  侯晓  董新刚
作者单位:中国航天科技集团公司四院四十一所,西安,710025
基金项目:国防科技重点实验室基金试点项目,编号 98JS60 .2 .3ZS 60 0 5。
摘    要:用Fluent计算流体力学软件对固体火箭发动机喷管流场进行了数值计算,研究了喷管收敛半角,喷管喉部上游圆弧曲率半径长喉部圆柱段长度对喷管流场的影响,研究结果表明,喷管喉部圆柱段长度对流量影响不大,喷管流量随喷管收敛半角的增大而减小,喷管流量随喷管喉部上游圆弧半径的增大而增大。所提供的结论可供喷管设计人员参考。

关 键 词:固体推进剂  火箭发动机  喷管喉部型面  喷管收敛段  喷管流量  影响
文章编号:1006-2793(2002)01-0010-02

Effects of nozzle contour in convergent section and throat on mass flow rate
Abstract:Nozzle flow field of SRM was numerically simulated with Fluent software.The effects of nozzle convergent half angle,radius of curvature on upstream of throat section and length of throat cylinder on flow field are investigated.The results show that the influence of length of throat cylinder on flow rate is very small;flow rate decreases along with the increase of nozzle convergent half angle,and increases along with the increase of curvature radius of the throat upstream.The conclusion can be referred by nozzle designers.
Keywords:solid propellant rocket engine  rocket nozzle  nozzle efficiency
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号