| 原位合成TiB2/6351复合材料热压缩变形特性 |
| |
| 引用本文： | 郭胜利,李德富,陈东,王浩伟. 原位合成TiB2/6351复合材料热压缩变形特性[J]. 航空材料学报, 2009, 29(3): 66-70 |
| |
| 作者姓名： | 郭胜利 李德富 陈东 王浩伟 |
| |
| 作者单位： | 北京有色金属研究总院,加工工程研究中心,北京,100088;上海交通大学,金属基复合材料国家重点实验室,上海,200030 |
| |
| 摘 要： | 采用Gleeble-1500D热模拟试验机对原位合成TiB2(质量分数,8%)/6351复合材料在不同变形温度和不同应变速率条件下的热变形特性进行了研究,利用透射电镜(TEM)和光学显微镜分析了压缩后试样的微观组织.结果表明, 材料的流变应力随变形温度的升高而降低,随应变速率的提高而增大;材料的流变行为主要表现为加工硬化、动态回复和动态再结晶;相应的显微组织特征为:位错网络、混乱的位错团和胞状结构,亚晶及等轴晶.在应变速率和变形温度均较低时,增强体颗粒周围的基体中形成高密度位错区,但随变形温度的升高而减少;在应变速率较高时,增强体颗粒和基体的界面处开裂甚至增强体颗粒本身发生破碎.
|
| 关 键 词： | TiB2/6351复合材料 加工硬化 动态回复 动态再结晶 亚晶 |
Characteristics of Hot Compression Deformation for In-situ TiB_2/6351 Composites |
| |
| GUO Sheng-li,LI De-fu,CHEN Dong,WANG Hao-wei. Characteristics of Hot Compression Deformation for In-situ TiB_2/6351 Composites[J]. Journal of Aeronautical Materials, 2009, 29(3): 66-70 |
| |
| Authors: | GUO Sheng-li LI De-fu CHEN Dong WANG Hao-wei |
| |
| Affiliation: | 1.Processing Engineering Research Center;General Research Institute for Nonferrous Metals;Beijing 100088;China;2.State Key Laboratory of Metal Matrix Composite;Shanghai Jiaotong University;Shanghai 200030;China |
| |
| Abstract: | The characteristics of hot compression deformation for in-situ TiB2/6351 composites have been studied in the different temperatures and strain rates using Gleeble-1500D system and the microstructures of compression samples were observed by transmission electron microscopy(TEM) and optical microscope.The results show that flow stress is affected obviously by strain rate and deformation temperature.Flow stress decreases with deformation temperature rising at constant strain rate,and increased with strain rate... |
| |
| Keywords: | TiB2/6351 composites work hardening dynamic recovery dynamic recrystallization subgrain |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
