| 气膜冷却传热传质类比研究 |
| |
| 引用本文： | 王建,孙冰,魏玉坤.气膜冷却传热传质类比研究[J].火箭推进,2008,34(2):31-36. |
| |
| 作者姓名： | 王建 孙冰 魏玉坤 |
| |
| 作者单位： | 1. 北京航空航天大学宇航学院,北京,100083
2. 中国人民解放军空军第四飞行学院模拟训练中心,石家庄,050071 |
| |
| 摘 要： | 应用SSTκ-ω湍流模型，对三维粘性掺混流场进行了数值模拟，得到了切向入射的超声速氢气膜在不同吹风比和被冷却面上的绝热温比分布，并通过冷却剂分布情况详细研究了其形成原因。计算结果表明：吹风比是决定超声速气膜冷却效果的重要因素，吹风比增大，冷却效果随之提高；不同曲率的曲面上，冷却效率的分布规律不同，凹面上冷却效果最好，这与低速气膜冷却不同；离散孔在被冷却面中心和两侧的冷却效果存在明显差异，引入一定的侧向倾角使这种差异趋向消失。
|
| 关 键 词： | 超声速 气膜冷却 数值模拟 绝热温比 传热传质 |
| 修稿时间： | 2007年9月13日 |
Heat and mass transfer in gaseous film cooling |
| |
| Wang Jian,Sun Bing,Wei Yukun.Heat and mass transfer in gaseous film cooling[J].Journal of Rocket Propulsion,2008,34(2):31-36. |
| |
| Authors: | Wang Jian Sun Bing Wei Yukun |
| |
| Institution: | Wang Jian, Sun Bing, Wei Yukun (1 School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing, 100083, China; 2 Simulator Training Center of NO.4 Hying College of the Air Force of PLA, Shijiazhuang, 050071, China) |
| |
| Abstract: | The SST κ-ω turbulence model is employed to compute the 3D viscous mixing flow field in order to investigate the supersonic gaseous hydrogen film cooling injected tangentially. Results show that blowing rate is an important factor, along with the increase of which, the adiabatic film cooling effectiveness is enhanced. The distribution of adiabatic film cooling effectiveness on concave is better than convex and plate, which is different from subsonic film cooling. The film cooling effectiveness is different between the centerline and side ones under discrete coolant channels, which can be avoided by an appropriate fl angle. |
| |
| Keywords: | supersonic gaseous film cooling numerical simulation adiabatic film cooling effectiveness heat and mass transfer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
