首页 | 本学科首页   官方微博 | 高级检索  
     检索      

真空室压升法测量液态工质漏率可行性分析
引用本文:孙 伟,闫荣鑫,韩 琰,邵容平.真空室压升法测量液态工质漏率可行性分析[J].航天器环境工程,2011,28(5):467-470.
作者姓名:孙 伟  闫荣鑫  韩 琰  邵容平
作者单位:北京卫星环境工程研究所;
摘    要:文章旨在探讨压升法测量液态工质漏率的可行性,研究液体泄漏的试验方法.首先根据液体饱和蒸气压的理论分析,得出液体挥发引起的定容压力增量;之后通过微进样系统,采用真空室静态升压方法,分别以全氟三乙胺和乙二醇水溶液为研究对象进行试验分析,研究得出漏入液体量V与压力变化ΔP成线性关系,与理论分析计算结果相符合,证明了压升法测液...

关 键 词:静态压升法  液态工质  漏率  理论分析  试验研究
收稿时间:2011/1/25 0:00:00
修稿时间:2011/9/23 0:00:00

Feasibility analysis of liquid leak rate testing with vacuum method
Sun Wei,Yan Rongxin,Han Yan and Shao Rongping.Feasibility analysis of liquid leak rate testing with vacuum method[J].Spacecraft Environment Engineering,2011,28(5):467-470.
Authors:Sun Wei  Yan Rongxin  Han Yan and Shao Rongping
Institution:Sun Wei,Yan Rongxin,Han Yan,Shao Rongping(Beijing Institute of Spacecraft Environment Engineering,Beijing 100094,China)
Abstract:This paper studies the feasibility of testing liquid leak rate with the vacuum method.Based on the theoretical analysis of the saturated vaporization pressure,the constant-volume pressure increment is obtained.Then by using a micro infusing system and a vacuum method,i.e.the static pressure rise method,the liquid leak testing is carried out for C2H4(OH)2 and(C2F5)3N.The results show that there is a linear relationship between the leaking liquid volume V and the pressure increment ΔP,as in agreement with the theoretical calculation,which shows the feasibility of the vacuum method for testing liquid leak rate.The static pressure rise method with a micro infusing system for calibration is proposed and the calculation formula is obtained.It is shown that this method is effective for testing liquid leak rate,as a tool in the liquid flowing test study.
Keywords:static pressure rise method  liquid medium  leak rate  theoretical analysis  experimental study  
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《航天器环境工程》浏览原始摘要信息
点击此处可从《航天器环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号