| 五坐标数控加工刀位轨迹及其干涉检查的算法研究 |
| |
| 引用本文： | 王清辉,廖文和,刘壮,周儒荣.五坐标数控加工刀位轨迹及其干涉检查的算法研究[J].航空学报,1997,18(3):330-335. |
| |
| 作者姓名： | 王清辉 廖文和 刘壮 周儒荣 |
| |
| 作者单位： | 南京航空航天大学机电工程学院, 南京, 210016 |
| |
| 基金项目： | 国家教委博士点基金,江苏省青年科技基金 |
| |
| 摘 要： | CAD/CAM系统中复杂曲面数控加工刀轨的计算能力在工业中有极其重要的作用。介绍一种复杂曲面五坐标加工轨迹生成及干涉处理算法，即把曲面用小三角片离散逼近，并用连通图建立所有三角片之间的拓扑关系，在此基础上生成刀轨，并进行干涉检查及刀位修正。
|
| 关 键 词： | 数控加工 复杂曲面 5轴加工 干涉处理 |
| 收稿时间： | 1996-03-21 |
| 修稿时间： | 1996-07-19 |
STUDIES ON THE ALGORITHM FOR 5 AXIS MACHINING OF SCULPTURED SURFACES |
| |
| Wang Qinghui,Liao Wenhe,Liu Zhuang,Zhou Rurong.STUDIES ON THE ALGORITHM FOR 5 AXIS MACHINING OF SCULPTURED SURFACES[J].Acta Aeronautica et Astronautica Sinica,1997,18(3):330-335. |
| |
| Authors: | Wang Qinghui Liao Wenhe Liu Zhuang Zhou Rurong |
| |
| Institution: | Mechanical Engineering Institute, Nanjing University of Aeronautics and Austronautics, Nanjing, 210016 |
| |
| Abstract: | NC machining path of sculptured surfaces in CAD/CAM systems plays a key role in manufacture. This paper describes a new algorithm for 5 axis machining of sculptured surfaces and the algorithm for gouge free. The approach includes (1) the tessellation of the parametric surfaces into triangles, (2) building topological relation between triangles, (3) 5 axis tool path generations and (4) interference detection and tool position correction. |
| |
| Keywords: | NC machining sculptured surface 5 axis machining gouge avoidance |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《航空学报》浏览原始摘要信息 |
| 点击此处可从《航空学报》下载免费的PDF全文 |
|
