| 熔融沉积快速成型喷头有限元辅助设计 |
| |
| 引用本文： | 王伊卿,方勇,乐光,卢秉恒.熔融沉积快速成型喷头有限元辅助设计[J].航空精密制造技术,2009,45(3). |
| |
| 作者姓名： | 王伊卿 方勇 乐光 卢秉恒 |
| |
| 作者单位： | 西安交通大学制造系统工程国家重点实验室,陕西,西安,710049 |
| |
| 摘 要： | 对两种典型结构熔融沉积快速成型喷头中材料的压力场和速度场进行了有限元分析和实验验证.结果表明,外置喷嘴出口压力骤降,出丝阻力增大;喷嘴外置式喷头由于融化罐与喷嘴材料流动速度矢量的极度不一致,材料补充不及时,导致断丝现象;一体化喷头融化罐内材料流动速度矢量和喷嘴出丝方向一致,保证出丝顺畅.
|
| 关 键 词： | 熔融沉积 喷头 有限元 工艺优化 |
Finite Element Aided Design of Nozzle Head in FDM |
| |
| WANG Yi-qing,FANG Yong,LE Guang,et al..Finite Element Aided Design of Nozzle Head in FDM[J].Aviation Precision Manufacturing Technology,2009,45(3). |
| |
| Authors: | WANG Yi-qing FANG Yong LE Guang |
| |
| Institution: | State Key Laboratory for Manufacturing Systems Engineering;Xi'an 710049 |
| |
| Abstract: | The pressure area and velocity area of material in two typical structure nozzle head of air pressed fused deposition modeling(FDM) are analyzed with finite element method and confirmed by experiments.The results shows that the pressure near the nozzle outlet with outside jet nozzle drop down suddenly,this can lead the silk squeeze out resistance increase.The material flow velocity vector extremely inconsistent between the melting pot and jet nozzle in the nozzle head with outside jet nozzle,the material is ... |
| |
| Keywords: | fused deposition nozzle head finite element process optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
