| 刀具材料对CFRP齿槽加工质量的影响 |
| |
| 引用本文： | 苏飞,袁军堂,汪振华,邓朝晖,孙富建.刀具材料对CFRP齿槽加工质量的影响[J].宇航材料工艺,2018,48(1):85-88. |
| |
| 作者姓名： | 苏飞 袁军堂 汪振华 邓朝晖 孙富建 |
| |
| 作者单位： | 湖南科技大学智能制造研究院;南京理工大学机械工程学院; |
| |
| 基金项目： | “十二五”国防预研课题（62201060402）；博士启动基金（E56122） |
| |
| 摘 要： | 采用硬质合金(YG6X)和PCD刀具分别对CFRP进行齿槽加工试验,探究刀具材料对齿槽加工质量的影响。结果表明:随着每齿进给量f_z的增大,撕裂因子F_(sl)呈明显的增大趋势;采用PCD铣刀铣制齿槽,其加工质量较为稳定,加工质量较理想。
|
| 关 键 词： | 碳纤维复合材料(CFRP) 齿槽加工 加工质量 成型铣削 |
| 收稿时间： | 2017/4/21 0:00:00 |
| 修稿时间： | 2017/10/11 0:00:00 |
Influence of Tool Materials on Machining Quality of CFRP Slots |
| |
| SU Fei,YUAN Juntang,WANG Zhenhu,DENG Zhaohui and SUN Fujian.Influence of Tool Materials on Machining Quality of CFRP Slots[J].Aerospace Materials & Technology,2018,48(1):85-88. |
| |
| Authors: | SU Fei YUAN Juntang WANG Zhenhu DENG Zhaohui and SUN Fujian |
| |
| Institution: | Intelligent Manufacturing Institute, Hunan University of Science and Technology, Xiangtan 411201,School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094,School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094,Intelligent Manufacturing Institute, Hunan University of Science and Technology, Xiangtan 411201 and Intelligent Manufacturing Institute, Hunan University of Science and Technology, Xiangtan 411201 |
| |
| Abstract: | A carbide slotting cutter and a PCD slotting cutter were used for the slotting of the carbon-cloth CFRP, respectively. Then, the effect of the tool material on the machining quality was studied.The delamination of the slot was increased as the feed per tooth increased.It showed that utilizing the PCD slotting cutter one would achieve a stable machining quality of the slots. And an ideal machining quality of the slots will be achieved. |
| |
| Keywords: | Carbon fiber-reinforced plastics(CFRP) Slotting Machining quality Forming milling |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|
