| δ0.05mm薄钢带力学性能测试方法研究 |
| |
| 引用本文： | 徐秋发,李东东,杨庆功,李阿妮,刘宗杰,展晓艳.δ0.05mm薄钢带力学性能测试方法研究[J].宇航计测技术,2019,39(2):67. |
| |
| 作者姓名： | 徐秋发 李东东 杨庆功 李阿妮 刘宗杰 展晓艳 |
| |
| 作者单位： | 1、中国运载火箭技术研究院，北京 100076 |
| |
| 摘 要： | 研究了拉伸速率、试样类型、试样表面状态对δ0.05mm薄钢带力学性能测试的影响，通过数据对比，结果表明：拉伸速率对薄钢带的力学性能测试结果影响并不大，而试样的类型和试样的表面状态对力学性能测试结果有很大的影响；表面无缺陷的哑铃型试样可以满足检测要求，提高钢带检验一次合格率。
|
| 关 键 词： | 薄钢带 加工方法 拉伸速率 表面状态 力学性能 |
Research on the Testing Method of Mechanical Properties of Thin Strip with δ0.05mm |
| |
| XU Qiu-fa,LI Dong-dong,YANG Qing-gong,LI A-ni,LIU Zong-jie,ZHAN Xiao-yan.Research on the Testing Method of Mechanical Properties of Thin Strip with δ0.05mm[J].Journal of Astronautic Metrology and Measurement,2019,39(2):67. |
| |
| Authors: | XU Qiu-fa LI Dong-dong YANG Qing-gong LI A-ni LIU Zong-jie ZHAN Xiao-yan |
| |
| Institution: | 1、China Academy of Launch Vehicle Technology， Beijing 100076,China |
| |
| Abstract: | The effect of tensile rate，sample type and surface state on the mechanical properties test of thin strip with δ0.05mm ie studied. The results show that the tensile rate has little influence on the mechanical properties of the thin strip，and sample type and surface state had significant influence on the mechanical properties. Dumbbell shaped sample without defects on the surface could meet the requirements for testing and improved primary the qualification rate of thin strip. |
| |
| Keywords: | Thin strip Processing method Tensile rate Surface state Mechanical property |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航计测技术》浏览原始摘要信息 |
| 点击此处可从《宇航计测技术》下载免费的PDF全文 |
