首页 | 本学科首页   官方微博 | 高级检索  
     检索      

降低硝酸酯增塑聚醚推进剂燃速研究
引用本文:官焕祥,刘云飞,姚维尚,谭惠民.降低硝酸酯增塑聚醚推进剂燃速研究[J].推进技术,2007,28(2):216-219.
作者姓名:官焕祥  刘云飞  姚维尚  谭惠民
作者单位:北京理工大学,材料科学与工程学院,北京,100081
摘    要:采用调节硝酸酯增塑聚醚(NEPE)推进剂的配方组分、添加燃速调节剂等手段开展了降低环氧乙烷-四氢呋喃共聚醚/硝化甘油/硝化二乙二醇/黑索金/高氯酸铵(P(E-CO-T)/NG/DEGDN/RDX/AP)类NEPE推进剂燃速的研究。结果表明,增大AP粒径、降低NG/DEGDN的比例、适当降低AP含量、添加少量燃速调节剂,可达到降低燃速的目的。通过对NEPE推进剂配方组分的调节,在燃速调节剂三醋酸甘油酯/聚甲醛/蔗糖八醋酸酯以1∶1∶1配比添加时,其7.0 MPa下的燃速可降至6.87 mm/s。

关 键 词:固体推进剂  燃烧性能  压强指数    燃速调节剂
文章编号:1001-4055(2007)02-0216-04
收稿时间:2006-03-29
修稿时间:2006-06-26

Study on decreasing the burning rate of nitrate ester plasticized polyether propellant
GUAN Huan-xiang,LIU Yun-fei,YAO Wei-shang and TAN Hui-min.Study on decreasing the burning rate of nitrate ester plasticized polyether propellant[J].Journal of Propulsion Technology,2007,28(2):216-219.
Authors:GUAN Huan-xiang  LIU Yun-fei  YAO Wei-shang and TAN Hui-min
Institution:Coll. of Material Science and Engineering, Beijing Inst. of Technology, Beijing 100081, China
Abstract:Reducing burning rate of nitrate ester plasticized polyether(NEPE) propellant was studied by means of adding some burning rate modifiers and adjusting its composition.The results show that burning rate of the propellant can be depressed by enlarging the particle size of AP,reducing the ratio of NG/DEGDN,decreasing the content of AP and adding little content of burning rate modifiers.The burning rate under 7.0 MPa can be reduced to 6.87 mm/s with ratio 1:1:1 of burning rate modifiers glycerol triacetate/polyoxymethylene/sucrose octa-acetate.
Keywords:Solid propellant  Combustion perfonmance  Pressure exponent  Burning rate modifiers
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《推进技术》浏览原始摘要信息
点击此处可从《推进技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号