| 航空发动机涡轮榫接结构齿形基本参数研究 |
| |
| 引用本文： | 申秀丽,齐晓东,王荣桥,樊江,刘海.航空发动机涡轮榫接结构齿形基本参数研究[J].航空动力学报,2011,26(4):735-744. |
| |
| 作者姓名： | 申秀丽 齐晓东 王荣桥 樊江 刘海 |
| |
| 作者单位： | 1. 北京航空航天大学能源与动力工程学院,北京,100191
2. 中国航空工业集团公司沈阳发动机设计研究所,沈阳,110015 |
| |
| 摘 要： | 通过大量有限元分析和优化设计数值计算方法研究了楔形角、榫头颈宽、榫槽高度、上侧角、下侧角及拉削角等齿形基本参数对榫接结构强度的影响,并根据计算结果设计了新的结构模型,经过实验验证,新结构最大应力有所改善.研究表明,可以采用二维有限元分析结果来研究齿形基本参数对榫接结构应力分布的影响,但是其不能反映应力在轴向方向的变化.
|
| 关 键 词： | 榫头 榫槽 楔形角 拉削角 上侧角 光弹实验 |
| 收稿时间： | 2010/3/15 0:00:00 |
| 修稿时间： | 2010/7/14 0:00:00 |
Research on the dentiform basic parameters of aero-engine turbine joint structure |
| |
| SHEN Xiu-li,QI Xiao-dong,WANG Rong-qiao,FAN Jiang and LIU Hai.Research on the dentiform basic parameters of aero-engine turbine joint structure[J].Journal of Aerospace Power,2011,26(4):735-744. |
| |
| Authors: | SHEN Xiu-li QI Xiao-dong WANG Rong-qiao FAN Jiang and LIU Hai |
| |
| Institution: | SHEN Xiu-li1,QI Xiao-dong1,WANG Rong-qiao1,FAN Jiang1,LIU Hai2(1.School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,Beijing 100191,China,2.Shenyang Aeroengine Research Institute,Aviation Industry Corporation of China,Shenyang 110015,China) |
| |
| Abstract: | The impacts on joint structure strength of the dentiform basic parameters,such as wedge angle,blade root neck width,disc groove height,top flank angle,bottom flank angle and skew angle,were studied by lots of finite element and optimization design numerical methods.Based on the calculated results,a new model was established and verified experimentally,indicating that the maximum stress has been reduced.Results show that two-dimensional finite element analysis can be used to study the influence of dentiform ... |
| |
| Keywords: | blade root disc groove wedge angle skew angle top flank angle photo-elastic experiment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
