|
|||||
|
|
| 烧结温度对高韧性Al2O3陶瓷断裂韧性的影响 | |
| 引用本文： | 刘彤,刘文.烧结温度对高韧性Al2O3陶瓷断裂韧性的影响[J].北京航空航天大学学报,2001,27(6):681-683. |
| 作者姓名： | 刘彤 刘文 |
| 作者单位： | 1. 清华大学 材料科学与工程系; 2. 北京航空航天大学 飞行器设计与应用力学系 |
| 摘 要： | 针对一种通过球磨方法向初始原料氢氧化铝中添加晶种、采用热压方式烧结获得的高韧性Al2O3陶瓷材料,采用三点弯曲试件测定了不同烧结温度下的成组断裂韧度值,研究了烧结温度对该材料断裂韧性的影响规律,得出了断裂韧度随烧结温度增加有先升后降趋势,因而存在最佳烧结温度的结论.同时,通过不同烧结温度下瓷体表面显微结构的观察,分析了上述影响规律产生的机理. |
| 关 键 词： | 陶瓷 烧结 断裂韧性 |
| 文章编号： | 1001-5965(2001)06-0681-03 |
| 收稿时间： | 2000-04-10 |
| 修稿时间： | 2000年4月10日 |
Influence of Sintering Temperature on Fracture Toughness for High Toughness Alumina Ceramics |
|
| LIU Tong,LIU Wen-ting.Influence of Sintering Temperature on Fracture Toughness for High Toughness Alumina Ceramics[J].Journal of Beijing University of Aeronautics and Astronautics,2001,27(6):681-683. | |
| Authors: | LIU Tong LIU Wen-ting |
| Institution: | 1. Tsinghua University, Dept. of Materials Science and Engineering; 2. Beijing University of Aeronautics and Astronautics, Dept. of Flight Vehicle Design and Applied Mechanics |
| Abstract: | The fracture toughness of hot-pressed alumina ceramics at different sintering temperatures was examined. The high fracture toughness alumina samples were made from low-temperature-calcined α-alumina powder prepared from aluminum hydroxide by seeding of wet grinding abrasion powder. As the sintering temperature increased, the fracture toughness increased to an optimal temperature and then decreased. The fracture toughness is increased by the formation of elongated grain structure and decreased by abnormal grain growth. |
| Keywords: | ceramics sintering fracture toughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 | |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 | |