| 多个裁剪参数曲面的有限元混合网格剖分法 |
| |
| 引用本文： | 欧阳兴,施法中.多个裁剪参数曲面的有限元混合网格剖分法[J].北京航空航天大学学报,2001,27(2):209-212. |
| |
| 作者姓名： | 欧阳兴 施法中 |
| |
| 作者单位： | 北京航空航天大学 机械工程及自动化学院 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划);863-511-820-020; |
| |
| 摘 要： | 根据冲压模具形状特点,对由CAD/CAM系统建立的冲压模具的多裁剪参数曲面数学模型,提出了一种符合冲压成形有限元分析需要的三角形和四边形混合网格剖分算法.按几何离散控制参数即最长边、最短边、距离误差和角度误差,将多裁剪参数曲面离散为多边形集.利用曲面曲线查找裁剪参数曲面相邻关系,建立B-Rep表示的曲面几何模型,并更新多边形集.然后由多边形集得到三角形和四边形混合网格,结果网格单元是相容的,在相邻裁剪参数曲面边界处无裂缝和覆盖.
|
| 关 键 词： | 模具 冲压 有限元 裁剪参数曲面 网格 |
| 文章编号： | 1001-5965(2001)02-0209-04 |
| 收稿时间： | 1999-12-02 |
| 修稿时间： | 1999年12月2日 |
Algorithm for Mixed Meshing Multiple Trimmed ParametricSurfaces for Finite Element Analysis |
| |
| OUYANG Xing,SHI Fa-zhong.Algorithm for Mixed Meshing Multiple Trimmed ParametricSurfaces for Finite Element Analysis[J].Journal of Beijing University of Aeronautics and Astronautics,2001,27(2):209-212. |
| |
| Authors: | OUYANG Xing SHI Fa-zhong |
| |
| Institution: | Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation |
| |
| Abstract: | According to the character of die shape, based on the mathematical model of multiple trimmed parametric surfaces, which is created by CAD/CAM system, an algorithm for generate mixed mesh of triangles and quadrilaterals for finite element analysis is presented. The trimmed parametric surfaces are discreted into polygons, which are controlled by the parameters of maximum edge length, minimum edge length, distance tolerance and angle tolerance, etc. The adjacent relation between surfaces is found and merged by surface curves, consequently, a model represented by boundary is created, the polygons are updated by surface curves, and mixed mesh is generated by these polygons. The resultant mesh is conformal, without crack and overlap between the adjacent surfaces. |
| |
| Keywords: | dies stamping finite elements trimmed parametric surface mesh |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
|
