首页 | 本学科首页   官方微博 | 高级检索  
     检索      

利用红外加热笼进行低热流模拟的 设计方法研究
引用本文:杨晓宁,孙玉玮.利用红外加热笼进行低热流模拟的 设计方法研究[J].航天器环境工程,2007,24(6):374-376.
作者姓名:杨晓宁  孙玉玮
作者单位:北京卫星环境工程研究所,北京,100094
摘    要:在航天器热平衡试验中,散热面区域的低热流密度要求往往难以实现.在以往的试验中,考虑到加热笼覆盖系数对热流密度均匀性的影响,通常选用红外灯阵作为主要的外热流模拟装置.但是红外灯阵体积和热容较大,形状适应性不强,对试验容器空间要求较高.文章利用仿真的手段研究了加热笼的覆盖系数对热流密度均匀性的影响,探讨了利用红外加热笼进行低热流模拟的可行性.

关 键 词:热平衡试验  红外加热笼  低热流  覆盖系数  利用  红外加热笼  热流模拟  设计方法  研究  cage  heating  infrared  surface  spacecraft  flux  手段  仿真  空间  试验容器  适应性  形状  热容  体积  模拟装置
文章编号:1673-1379(2007)06-0374-03
收稿时间:2007/7/27 0:00:00
修稿时间:2007年7月27日

Simulating low flux on spacecraft surface by using infrared heating cage
Yang Xiaoning,Sun Yuwei.Simulating low flux on spacecraft surface by using infrared heating cage[J].Spacecraft Environment Engineering,2007,24(6):374-376.
Authors:Yang Xiaoning  Sun Yuwei
Abstract:In thermal balance testing of spacecraft,it is difficult to achieve a low flux on radiator surfaces.Infrared lamp arrays have long been adopted as primary simulation equipment of thermal flux,considering the effect of cover coefficient of infrared heating cage on flux uniformity.But large volume and thermal capacity of infrared lamp arrays reduces its flexibility and puts more severe requirements on testing vessel,making its installation and suspending work more complex than when using infrared heating cage.The influence of cover coefficient of infrared heating cage on the flux uniformity on spacecraft surface is calculated in this paper,and the feasibility of simulating low flux on spacecraft surface by using inflated heating cage is discussed.
Keywords:thermal balance test  infrared heating cage  low heat flux  cover coefficient  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航天器环境工程》浏览原始摘要信息
点击此处可从《航天器环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号