|
|||||
|
|
| 多轴加工刀轨最优行距计算方法研究 | |
| 引用本文： | 严思杰,周云飞,赖喜德,陈学东. 多轴加工刀轨最优行距计算方法研究[J]. 航空精密制造技术, 2006, 42(5): 35-38 |
| 作者姓名： | 严思杰 周云飞 赖喜德 陈学东 |
| 作者单位： | 华中科技大学,国家数控系统工程研究中心,湖北,武汉,430074 |
| 基金项目： | 国家自然科学基金项目(50245011)，国家重点基础研究发展计划(973)资助项目2003CB716206 |
| 摘 要： | 以五轴加工为例,对多轴加工行距提出了一套刀轨最优行距计算方法。该方法通过推导五轴加工刀具运动刃口回转面包络方程,计算相邻轨迹刀具包络面的交线,即残余凸台的顶尖线,进一步计算该线到加工曲面的距离,从而得到最大残余高度值,由此判断当前行距的优劣,据此进行进一步的搜索,最终得到最优的行距。 |
| 关 键 词： | CAD/CAM 五轴加工 轨迹规划 包络面 行距 |
| 文章编号： | 1003-5451(2006)05-0035-04 |
| 修稿时间： | 2006-04-14 |
Research on the Method of Calculating the Cutter Location Optimal Path Interval in Muti-Axis Machining |
|
| YAN Si-jie,ZHOU Yun-fei,LAI Xi-de,et al. Research on the Method of Calculating the Cutter Location Optimal Path Interval in Muti-Axis Machining[J]. Aviation Precision Manufacturing Technology, 2006, 42(5): 35-38 | |
| Authors: | YAN Si-jie ZHOU Yun-fei LAI Xi-de et al |
| Abstract: | Taking the five-axis as an example, the method of calculating the cutter location optimal path interval in multi-axis machining is researched. An algorithm of calculating the optimal path interval is presented, which deduces the equation of cutter envelop surface while linear interpolation firstly, then the intersection curves of two closest envelop surfaces along the path interval can get. Further, the biggest distance about the intersection curves to the CAD surface can be calculated, and according to the result, the rationality of the path interval can be judged, thus the optimal path interval can be obtained. |
| Keywords: | CAD/CAM five-axis machining path planning enveloping surface path interval |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |