高温对单搭接接头强度的影响 |
| |
引用本文: | 王玉奇,何晓聪,周 森,邢保英,杨慧艳.高温对单搭接接头强度的影响[J].宇航材料工艺,2014,44(2):78-82. |
| |
作者姓名: | 王玉奇 何晓聪 周 森 邢保英 杨慧艳 |
| |
作者单位: | 昆明理工大学机电工程学院 |
| |
摘 要: | 对不同温度下单搭接接头进行拉伸试验,对比不同温度对接头强度的影响。结果表明,温度越 高,接头强度越低,同时,随着温度的升高,胶层的破坏模式也发生变化。通过有限元数值仿真,模拟不同温度 下胶层表面上等效应力的分布情况,得出温度越高,胶层热应力越大,接头强度越低等结论。
|
关 键 词: | 高温 粘接接头 有限元 热应力 |
Influences of High Temperature on Strength ofAdhesively Bonded Single Lap Joints |
| |
Institution: | Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology |
| |
Abstract: | In order to explore the strength of the structure with lap joints, the adhesively bonded single lap joints with differential temperature were tested in tension loading which creates shear across the bondline. The equivalent stress was obtained through finite element analysis to define the effect of temperature, which helped to get the conclusions that the higher of the temperature, the bigger of the thermal stress and thermal stress value and the stronger of the adhesive strength. Then, the failure modest of the adhesive varioused with the increasing of the temperature. |
| |
Keywords: | High temperature Bonded joint FEM Thermal stress |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|