Large light X-ray optics: basic ideas and concepts

One of the main guidelines for future X-ray astronomy projects like, e.g., XEUS (ESA) and Generation-X (NASA) is to utilize grazing-incidence focusing optics with extremely large telescopes (several tens of m² at 1 keV), with a dramatic increase in collecting area of about two order of magnitude compared to the current X-ray telescopes. In order to avoid the problem of the source's confusion limit at low fluxes, the angular resolution required for these optics should be superb (a few arcsec at most). The enormous mirror dimensions together with the high imaging performances give rise to a number of manufacturing problems. It is basically impossible to realize so large mirrors from closed Wolter I shells which benefit from high mechanical stiffness. Instead the mirrors need to be formed as rectangular segments and a series of them will be assembled in a petal. Taking into account the realistic load capabilities of space launchers, to be able to put in orbit so large mirror modules the mass/geometric-area ratio of the optics should be very small. Finally, with a so large optics mass it would be very difficult to provide the electric power for an optics thermal active control, able to maintain the mirrors at the usual temperature of 20 °C. Therefore, very likely, the optics will instead operate in extreme thermal conditions, with the mirror temperature oscillating between −30 and −40 °C, that tends to exclude the epoxy replication approach (the mismatch between the CTE of the substrate and that of the resin would cause prohibitively large deformations of the mirror surface profiles). From these considerations light weight materials with high thermal–mechanical properties such as glass or ceramics become attractive to realize the mirrors of future Xray telescopes. In this paper, we will discuss a segments manufacturing method based on Borofloat^TM glass. A series of finite element analysis concerning different aspects of the production, testing and integration of the optics are also presented as well.