| 用凝固模拟方法预测铝合金铸件缩松的形成 |
| |
| 引用本文： | 陈昌明 徐介文. 用凝固模拟方法预测铝合金铸件缩松的形成[J]. 南昌航空工业学院学报, 1994, 0(1): 85-90 |
| |
| 作者姓名： | 陈昌明 徐介文 |
| |
| 摘 要： | 用有限元法和六节点等参数单元对铝合金金属型铸造过程进行了温度场的数值模拟，对铸件不同典型部位进行了金相分析，结果表明，参数Ｇ／可有效地预测铝合金缩松形成倾向的大小，计算值与实测值基本一致。
|
| 关 键 词： | 铝合金；金属型铸造；缩松；计算机模拟 |
The Prediction of Porosity Formation in Al-Alloy Castings by means of Solidification Simulation |
| |
| Chen Changming, Xu Jiewen, Fang Ligao. The Prediction of Porosity Formation in Al-Alloy Castings by means of Solidification Simulation[J]. Journal of Nanchang Institute of Aeronautical Technology(Natural Science Edition), 1994, 0(1): 85-90 |
| |
| Authors: | Chen Changming Xu Jiewen Fang Ligao |
| |
| Affiliation: | Dept. of Materials Engineerimg |
| |
| Abstract: | In this paer, FEM with six-noded quadratic equiparametric elements has been used to digitally simulate the temperature fields in the process of metal mould casting of Al-alloy. Metallographic analysis has also been performed on the typical sites of the castings. Results show the ability of the parmeter,G/R, to effectively predict the degrees of the tendencies to form porosities inside the castings. Experimetal data are in good tune with the calculated ones. |
| |
| Keywords: | s: Al-alloy metal mould casting porosity computer simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
