| 周向均布拉杆转子预紧力的确定 |
| |
| 引用本文： | 李辉光,刘恒,虞烈.周向均布拉杆转子预紧力的确定[J].航空动力学报,2011,26(12):2791-2797. |
| |
| 作者姓名： | 李辉光 刘恒 虞烈 |
| |
| 作者单位： | 西安交通大学机械工程学院,西安710049／西安交通大学机械结构强度与振动国家重点实验室,西安710049 |
| |
| 基金项目： | 国家重点基础研究发展计划(2007CB707705, 2007CB707706) |
| |
| 摘 要： | 对周向均布拉杆转子进行考虑接触的三维有限元应力分析,揭示了不同拉杆预紧力和运行工况下拉杆转子的应力分布及界面接触状态演化规律.计算结果表明：拉杆转子在传递功率和横向载荷时,接触界面会发生局部分离和滑移,导致其承载能力小于整体转子;随着预紧力的增加,拉杆转子能够传递更大的载荷,但最大应力显著增加,降低了材料的强度裕度.根...
|
| 关 键 词： | 拉杆转子 接触 预紧力 应力 有限元 |
| 收稿时间： | 1/4/2011 12:00:00 AM |
| 修稿时间： | 5/8/2011 12:00:00 AM |
Determination of preload force of circumferential distributed rod fastening rotor |
| |
| LI Hui-guang,LIU Heng and YU Lie.Determination of preload force of circumferential distributed rod fastening rotor[J].Journal of Aerospace Power,2011,26(12):2791-2797. |
| |
| Authors: | LI Hui-guang LIU Heng and YU Lie |
| |
| Institution: | School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China;State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an 710049, China;School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China;State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an 710049, China;School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China;State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an 710049, China |
| |
| Abstract: | Three dimensional finite element stress analysis of circumferential distributed rod fastening rotor considering contact was performed.The evolution laws of stress distribution and interface contact status were revealed with different preload forces and operation conditions.The calculation results show that contact interface may separate locally and slide when the rod fastening rotor transmits power and lateral load,which results in its carrying capacity less than integral rotor.With the increase of preload force,rod fastening rotor can transmit greater load,but the maximum stress increases significantly and the strength margin of material decreases.According to the obtained stress level of rod fastening rotor and contact stress distribution and the ratio between tangential force and normal force of contact interface,the method for determining preload force of rod is given to ensure structural integrity and structural strength requirements.The analysis also provides references for preload force determination of such rod fastening rotor. |
| |
| Keywords: | rod fastening rotor contact preload force stress finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
|
