首页 | 本学科首页   官方微博 | 高级检索  
     检索      

边界层对可调节进气道性能的影响
作者姓名:M.A.  Goldfeld  A.V.  Starov  K.  Yu.  Timofeev
作者单位:俄罗斯科学院赫里斯季安诺维奇理论与应用力学研究所西伯利亚分部,俄罗斯新西伯利亚630090
摘    要:给出了马赫数2-6、单位雷诺数(0.8-6.0)×10^7/m时下吹式风洞中可调节三维进气道的试验研究结果。研究了前缘前掠和后掠方案以及进气道人口前边界层的影响。测量了内流道内的压力分布、质量流量和总压恢复系数;确定了进气道启动与马赫数和流动工况的关系。研究结果表明:边界层对流场结构和模型进气道的性能有着决定性影响,相对简单的进气道调节方案可以增大其稳定运行范围。

关 键 词:三维高超声速进气道  边界层  下吹式风洞

Influence of the boundary layer on the performances of an adjustable inlet
Institution:M.A. Goldfeld, (Khristianovich Institute of Theoretical Siberian Branch, Novosibirsk 630090, A.V. Starov, K. Yu. and Applied Mechanics, Russia) Timofeev Russian Academy of Sciences,
Abstract:Results of experimental researches of an adjustable three-dimensional inlet in the blow down wind-tunnel at Mach numbers from 2 to 6 and unit Reynolds numbers from 0.8 × 10^7 up to 6. 0 × 10^7 1/m are presented. Influence of swept-forward and swept-back leading edges of the sidewalls and the boundary layer before the channel entrance of the inlet have been investiga- ted. Pressure distribution in channel, mass flow rate and total pressure recovery were deter- mined. Conditions of the inlet start depending on Mach number and flow conditions have been de- termined. It was shown that the boundary layer exerts determining influence on structure of flow and on the performances of the model inlet. Relatively simple scheme of adjustment of the inlet allows expanding a range of its steady operation.
Keywords:3D hypersonic inlet: boundarv laver: blow-down wind-tunnel =3D hypersonic inlet  boundary layer  blow-down wind-tunnel
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号