首页 | 本学科首页   官方微博 | 高级检索  
     检索      

混杂碳/碳复合材料超高温拉伸断裂模式
引用本文:易法军,梁军,孟松鹤,杜善义.混杂碳/碳复合材料超高温拉伸断裂模式[J].航空材料学报,2002,22(1):16-21,30.
作者姓名:易法军  梁军  孟松鹤  杜善义
作者单位:哈尔滨工业大学复合材料研究所,黑龙江,哈尔滨,150001
基金项目:国家自然科学基金资助项目 (10 10 2 0 0 5,19932 0 30 )
摘    要:通过电子扫描电镜 (SEM)研究了混杂碳 /碳复合材料的组分微结构形态、内部微缺陷产生的原因以及随温度升高的演化规律 ,结合超高温拉伸试件断口的形貌分析 ,揭示了超高温条件下混杂碳 /碳复合材料的断裂机理。在温度和载荷载的作用下 ,基体内的孔洞和微裂纹逐渐融合、扩展、长大 ,纤维 /基体界面结合减弱、脱开 ,形成大的裂纹并沿着纤维 /基体界面迅速扩展 ,使得材料的性能退化 ,最终在某薄弱截面破坏

关 键 词:混杂碳/碳复合材料  微观结构  超高温  断裂
文章编号:1005-5053(2002)01-0016-06
修稿时间:2001年11月12

Research on tensile fracture mechanism of hybrid CARBON-CARBON composites at ultra high temperature
YI Fa jun,LIANG Jun,MENG Song he,DU Shan yi.Research on tensile fracture mechanism of hybrid CARBON-CARBON composites at ultra high temperature[J].Journal of Aeronautical Materials,2002,22(1):16-21,30.
Authors:YI Fa jun  LIANG Jun  MENG Song he  DU Shan yi
Abstract:The present paper is concerned with the evaluation of microstructure and interior defects of hybrid carbon carbon composites with increasing temperature The fracture mechanism of hybrid carbon carbon composites is also investigated from SEM photographs of fractured surfaces of specimens experienced ultra high temperature under tensile load, the conclusion is therefore obtained that the porous and cracks coalescence, growth and propagation and the fiber/matrix interfaces degeneration under the combination of ultra high temperature and load cause strength descend, composite would fractured from a weak section
Keywords:hybrid carbon  carbon composites  microstructure  ultra  high temperature  fracture
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号