| 无机型磷酸盐胶粘剂粘贴工艺对于有效粘贴的影响研究 |
| |
| 引用本文： | 魏元,徐岱,冯卫.无机型磷酸盐胶粘剂粘贴工艺对于有效粘贴的影响研究[J].航天器环境工程,2011,28(2):167-170. |
| |
| 作者姓名： | 魏元 徐岱 冯卫 |
| |
| 作者单位： | 1. 北京强度环境研究所,北京,100076
2. 中国航天科技集团公司,北京,100048 |
| |
| 摘 要： | 为了满足部分结构热试验对传感器的粘贴要求,研究分析了无机型Al(OH)<,3>与H<,3>PO<,4>混合的基底胶粘剂粘贴工艺,对胶粘剂有效粘贴试件的影响因素进行了理论分析和试验对比.结果表明表面处理工艺及适当的固化工艺有利于胶粘剂有效地将传感器粘贴在试件上.
|
| 关 键 词： | 无机型胶粘剂 磷酸盐 粘贴工艺 有效粘贴 |
The technique of effective paste of inorganic phosphate adhesive |
| |
| Wei Yuan,Xu Dai,Feng Wei.The technique of effective paste of inorganic phosphate adhesive[J].Spacecraft Environment Engineering,2011,28(2):167-170. |
| |
| Authors: | Wei Yuan Xu Dai Feng Wei |
| |
| Institution: | 1(1.Beijing Institute of Structure and Environment Engineering,Beijing 100076,China; 2.China Aerospace Science and Technology Corporation,Beijing 100048,China) |
| |
| Abstract: | To meet the requirements of sensor’s adhesion in some thermal tests of spacecraft structures,the factors that influence the paste effectiveness of the mixture of two inorganic adhesives,Al(OH)3 and H3PO4,are studied theoretically and experimentally.It is shown that proper surface treatment technology and curing process are conducive to the effective paste of sensors onto specimens. |
| |
| Keywords: | inorganic adhesive phosphate adhesion technique effective adhesion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航天器环境工程》浏览原始摘要信息 |
| 点击此处可从《航天器环境工程》下载免费的PDF全文 |
|
