增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。

Optimization study for minimized thermal stress on cutting techniques of reinforced Carbon/Carbon nose cone

For the cutting technique which puts reinforced C/C block into nose-cone,the orientation of anisotropic axis of coefficient of thermal expansion can influence the thermal stress considerably.So there is a possibility for optimization design to minimize the thermal stress of nose cone.In this paper,the optimization characteristics have been studied for minimized stress of reinforced C/C nose-cone with different ratios of anistropic axis modulus to isotropic plane modulus.It has been manifested that for diffe...