Numerical investigation of aerodynamic flow actuation produced by surface plasma actuator on 2D oscillating airfoil

Numerical simulation of unsteady flow control over an oscillating NACA0012 airfoil is investigated. Flow actuation of a turbulent flow over the airfoil is provided by low current DC sur-face glow discharge plasma actuator which is analytically modeled as an ion pressure force pro-duced in the cathode sheath region. The modeled plasma actuator has an induced pressure force of about 2 kPa under a typical experiment condition and is placed on the airfoil surface at 0%chord length and/or at 10%chord length. The plasma actuator at deep-stall angles (from 5° to 25°) is able to slightly delay a dynamic stall and to weaken a pressure fluctuation in down-stroke motion. As a result, the wake region is reduced. The actuation effect varies with different plasma pulse frequen-cies, actuator locations and reduced frequencies. A lift coefficient can increase up to 70%by a selec-tive operation of the plasma actuator with various plasma frequencies and locations as the angle of attack changes. Active flow control which is a key advantageous feature of the plasma actuator reveals that a dynamic stall phenomenon can be controlled by the surface plasma actuator with less power consumption if a careful control scheme of the plasma actuator is employed with the opti-mized plasma pulse frequency and actuator location corresponding to a dynamic change in reduced frequency.