| 三元整体叶轮的几何造型与数控加工刀具路径规划 |
| |
| 引用本文： | 曹利新,苏云玲,金玉淑.三元整体叶轮的几何造型与数控加工刀具路径规划[J].推进技术,2005,26(2):188-192. |
| |
| 作者姓名： | 曹利新 苏云玲 金玉淑 |
| |
| 作者单位： | 1. 大连理工大学,精密与特种加工教育部重点实验室,辽宁,大连,116024
2. 沈阳鼓风机(集团)有限公司,沈阳透平机械股份有限公司,辽宁,沈阳,110022 |
| |
| 基金项目： | 国家自然科学基金资助项目 (50105001)。 |
| |
| 摘 要： | 采用三次B样条曲线对叶轮中性面上盖盘和轴盘的两组数据点进行插值，得到盖盘曲线和轴盘曲线，进而得到直纹面形式的叶轮中性面；按照叶片的厚度做盖盘曲线和轴盘曲线的变距偏置曲线，得到叶片曲面的直纹化表达式；在此基础上，讨论了三元叶轮加工的刀具路径规划方法，给出了确定球头刀刀心位置和计算残留误差的两种迭代算法，最后给出了加工实例。
|
| 关 键 词： | 叶轮 造型 刀具路径规划 数控加工 |
| 文章编号： | 1001-4055(2005)02-0188-05 |
| 修稿时间： | 2004年4月7日 |
Geometrical design and tool-path generation of three dimensional impeller |
| |
| CAO Li-xin,SU Yun-ling and JIN Yu-shu.Geometrical design and tool-path generation of three dimensional impeller[J].Journal of Propulsion Technology,2005,26(2):188-192. |
| |
| Authors: | CAO Li-xin SU Yun-ling and JIN Yu-shu |
| |
| Institution: | CAO Li-xin~1,SU Yun-ling~1,JIN Yu-shu~2 |
| |
| Abstract: | By using cubic B-spline curve technology, two group of date of shroud camber line and hub camber line were interpolated. According to the thickness of the blade, variable distance offset curves of the shroud camber line and hub camber line were acquired, then the blade surface can be expressed by ruled surface. Based on the above, NC machining tool-path of three dimensional impeller were generated. Two iterative algorithms were proposed. One is for determining the cutter center, the other is for determining geometrical cusp height. Finally, the machined 3D impeller is given. |
| |
| Keywords: | Impeller Modeling Tool-path generation~+ Numerically controlled machining |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《推进技术》浏览原始摘要信息 |
| 点击此处可从《推进技术》下载免费的PDF全文 |
|
