| 透明塑料板件注射-压缩成型模拟研究 |
| |
| 引用本文： | 李毅超,张宜生,李德群.透明塑料板件注射-压缩成型模拟研究[J].航空材料学报,2011,31(3):76-80. |
| |
| 作者姓名： | 李毅超 张宜生 李德群 |
| |
| 作者单位： | 华中科技大学,材料成形与模具技术国家重点实验室,武汉,430074 |
| |
| 摘 要： | 在非线性数值算法基础上,采用水平集方程、动量方程与能量方程进行多物理场全耦合计算的方法,对非对称几何板件的注射-压缩成型过程进行了模拟分析.结果表明,注射-压缩工艺较传统注射工艺能够显著降低制成件收缩率;成型过程中熔体的纤维流线长度与温度变化会对制件收缩率产生影响.较短的纤维流线,较均匀的温度分布能够获得更小、更均匀的...
|
| 关 键 词： | 注射-压缩成型 数值模拟 非线性 纤维流线 收缩率 |
Research of Injection-Compression Molding Simulation on Transparent Plastic Plate |
| |
| LI Yi-chao,ZHANG Yi-sheng,LI De-qun.Research of Injection-Compression Molding Simulation on Transparent Plastic Plate[J].Journal of Aeronautical Materials,2011,31(3):76-80. |
| |
| Authors: | LI Yi-chao ZHANG Yi-sheng LI De-qun |
| |
| Institution: | LI Yi-chao,ZHANG Yi-sheng,LI De-qun(State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) |
| |
| Abstract: | Based on nonlinear numerical algorithm,the method of the calculation of multiphysics of full-coupled manner by the level-set equation,momentum equation and energy equation was adopted to simulate the injection-compression molding on a non-symmetric geometric plate.The study showed that in comparison with injection molding,the injection-compression molding can greatly reduce the shrinkage of the product.In addition,during the forming process the length of the fiber flow line and the temperature change can af... |
| |
| Keywords: | injection-compression molding numerical simulation nonlinear fiber flow line shrinkage |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
