某型涡轴发动机研制过程中尾喷管漏油机理分析 |
| |
引用本文: | 匡浩波,朱勇,文柏衡.某型涡轴发动机研制过程中尾喷管漏油机理分析[J].直升机技术,2014(3):47-50. |
| |
作者姓名: | 匡浩波 朱勇 文柏衡 |
| |
作者单位: | 海军驻株洲地区航空军事代表室,湖南株洲412002 |
| |
摘 要: | 某型涡轴发动机在研制过程中屡次出现尾喷管漏油故障。在滑油系统原理分析的基础上,建立滑油泄漏故障树,对泄漏原因逐层剖析,并结合分解检查、零件计量等手段对发动机各相关部件和滑油泵进行详细分析,确定故障原因。针对影响因素,提出相应的整改措施。
|
关 键 词: | 尾喷管 漏油 轴承腔 回油不畅 |
Analysis of Oil Leakage from Exhaust Nozzle during a Turboshaft Engine Development |
| |
Authors: | KUANG Haobo ZHU Yong WEN Baiheng |
| |
Institution: | (Navy Aviation Military Representative Office in Zhuzhou Area, Zhuzhou 412002 ,China) |
| |
Abstract: | A turboshaft engine often occurred oil leakage from exhaust nozzle during development. A fault tree was set based on principle analysis of oil system. It analyzed each possible causes of leakage. Combined with methods as disassembly inspection and component measuring on related parts and oil pump, the failure cause is located. The solving solution was set aimed at the failure cause. |
| |
Keywords: | exhaust nozzle oil leakage bearing chamber oil scavenge block |
本文献已被 维普 等数据库收录! |