| 轧制变形及随后热处理对板条马氏体的影响 |
| |
| 引用本文： | 赵军,文全兴,米新兰.轧制变形及随后热处理对板条马氏体的影响[J].北华航天工业学院学报,2012,22(5):1-2. |
| |
| 作者姓名： | 赵军 文全兴 米新兰 |
| |
| 作者单位： | 北华航天工业学院材料工程系,河北廊坊,065000 |
| |
| 基金项目： | 河北省教育厅青年基金(2011252);河北省教育厅基金(Z2010203);北华航天工业学院科研基金(KY-2009-02-B);国家金属材料近净成形工程技术研究中心开放基金(2011010);河北省科技支撑计划项目(11212143) |
| |
| 摘 要： | 本文研究了轧制变形及随后热处理对板条马氏体的影响,结果表明：大变形量的重度轧制可使马氏体板条趋于沿轧向排列,层片致密,马氏体板条厚度缩减至20nm左右,在板厚方向上形成了显微层压板结构。低于350℃长时退火,组织处于回复阶段,马氏体形态与轧后近似;高于350℃退火,组织开始进入再结晶期,并有新晶粒生成。
|
| 关 键 词： | 板条马氏体 轧制变形 热处理 |
Effect of Rolling Deformation and Subsequent Heat Treatment on Lath Martensite |
| |
| ZHAO Jun,WEN Quan-xing,MI Xin-lan.Effect of Rolling Deformation and Subsequent Heat Treatment on Lath Martensite[J].Journal of North China Institute of Aerospace Engineering,2012,22(5):1-2. |
| |
| Authors: | ZHAO Jun WEN Quan-xing MI Xin-lan |
| |
| Institution: | (Materials the Engineering Department,North China Institute of Aerospace Engineering,Langfang 065000,China) |
| |
| Abstract: | This paper studies the effect of rolling deformation and subsequent heat treatment on lath martensite.The results show that severe rolling allows martensite lath be arranged along the rolling direction,its lamella becomes dense;the thickness of martensite lath is reduced to about 20nm,and laminate composite is formed in the thickness direction.Annealing below 350℃,the microstructure is recovered and its morphology shows no difference after rolling.Annealing above 350℃,the microstructure is re-crystallized and new grain is formed. |
| |
| Keywords: | lath martensite rolling deformation heat treatment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
