Dual Drive Curve Tool Path Planning Method for 5-axis NC Machining of Sculptured Surfaces |
| |
Authors: | Xu Rufeng Chen Zhitong Chen Wuyi Wu Xianzhen Zhu Jianjun |
| |
Affiliation: | 1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;2. Changhe Aircraft Industries Group, Jingdezhen 333000, China |
| |
Abstract: | The problem of finished surface being not first-order continuous commonly exists in machining sculptured surfaces with a torus cutter and some other types of cutters. To solve this problem, a dual drive curve tool path planning method is proposed in this article. First, the maximum machining strip width of a whole tool path can be obtained through optimizing each tool position with multi-point machining (MPM) method. Second, two drive curves are then determined according to the obtained maximum machining strip width. Finally, the tool is positioned once more along the dual drive curve under the condition of tool path smoothness. A computer simulation and cutting experiments are carried out to testify the performance of the new method. The machined surface is measured with a coordinate measuring machine (CMM) to examine the machining quality. The results obtained show that this method can effectively eliminate sharp scallops between adjacent tool paths, keep tool paths smooth, and improve the surface machining quality as well as machining efficiency. |
| |
Keywords: | dual drive curve tool path planning multi-point machining 5-axis sculptured surfaces numerical control (NC) machining |
本文献已被 万方数据 ScienceDirect 等数据库收录! |
|