| 考虑平整性要求的板壳自适应结构静变形控制 |
| |
| 引用本文： | 黄海,孙文俊.考虑平整性要求的板壳自适应结构静变形控制[J].宇航学报,2001,22(4):71-75. |
| |
| 作者姓名： | 黄海 孙文俊 |
| |
| 作者单位： | 北京航空航天大学宇航学院, |
| |
| 基金项目： | 北京市科技新星项目资助 |
| |
| 摘 要： | 基于四节点压电复合材料层合板单元和相应有限分析方法，利用结构位移对电压的灵敏度，对以压电材料为作动器的板壳自适应结构，进行了考虑平整性要求的静力变形控制。根据控制目标和约束限制，由数学规划问题确定结构承载时作动器所需的控制电压，最后以数值算例给出了仿真结果，以验证所提出方法的有效性。
|
| 关 键 词： | 自适应结构 压电材料 变形控制 复合材料层合板 平整性 板壳 航天飞行器 |
| 文章编号： | 1000-1328(2001)04-0071-05 |
| 修稿时间： | 2001年1月8日 |
STATIC DEFORMATION CONTROL OF PLATELIKE ADAPTIVE STRUCTURES CONSIDERING SMOOTHNESS REQUIREMENT |
| |
| Hai Huang,Wenjun Sun.STATIC DEFORMATION CONTROL OF PLATELIKE ADAPTIVE STRUCTURES CONSIDERING SMOOTHNESS REQUIREMENT[J].Journal of Astronautics,2001,22(4):71-75. |
| |
| Authors: | Hai Huang Wenjun Sun |
| |
| Abstract: | Based on the 4 nodes element used for piezoelectric composite laminate plate and finite element method,and using sensitivities of structural displacements with respect to actuator voltages,the static deformation control considering smoothness requirement for platelike adaptive structure with piezoelectric material layers as actuators is studied in this paper.According to the control objective and constraints,the required actuator voltages to control the loaded structures are determined with mathematical programming problems.Simulation results are finally given here through numerical examples to verify the effectiveness of the proposed method. |
| |
| Keywords: | Adaptive structure Piezoelectric material Deformation control Composite laminated plate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
