|
|||||
|
|
| 连续加热时γ-TiAl激光快凝组织及其性能的变化 | |
| 引用本文： | 吴国清,黄正,林建国,杨金海.连续加热时γ-TiAl激光快凝组织及其性能的变化[J].北京航空航天大学学报,2003,29(3):241-243. |
| 作者姓名： | 吴国清 黄正 林建国 杨金海 |
| 作者单位： | 1. 北京航空航天大学 材料科学与工程系; 2. 湘潭大学 物理系 |
| 基金项目： | 国家自然科学基金;59971004; |
| 摘 要： | 为认识超塑扩散连接机理,研究了γ-TiAl基合金表层激光快速熔凝组织在连续加热过程中的相转变规律及硬度变化.结果表明,在以10℃/min连续加热时,γ-TiAl激光表面快速熔凝组织在750℃左右发生α2→γ相转变,在860℃左右其组织由枝晶组织转变为细小的等轴晶组织,硬度值也出现了相应变化.上述细晶组织为合金的超塑扩散连接提供了良好的基础. |
| 关 键 词： | 显微组织 硬度 热处理 激光表面处理 TiAl基合金 |
| 文章编号： | 1001-5965(2003)03-0241-03 |
| 收稿时间： | 2001-10-10 |
| 修稿时间： | 2001年10月10日 |
Structure and Hardness Changes of Laser Melted TiAl Alloy Surface During Continuous Heating |
|
| Wu Guoqing,Huang Zheng,Lin Jianguo,Yang Jinhai.Structure and Hardness Changes of Laser Melted TiAl Alloy Surface During Continuous Heating[J].Journal of Beijing University of Aeronautics and Astronautics,2003,29(3):241-243. | |
| Authors: | Wu Guoqing Huang Zheng Lin Jianguo Yang Jinhai |
| Institution: | 1. Dept. of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics; 2. Department of Physics, Xiangtan University |
| Abstract: | Structural transformation and hardness variation in the laser melted TiAl intermetallic alloy surface during continuous heating were studied systemically. The results indicated that, during continuous heating from 50 to 1000℃ with a heating rate of 10℃/min, α2→γ phase transformation in the laser melted TiAl intermetallic alloy surface takes place at about 750℃, and the dendritic structure is transformed into fine-grained structure at about 860℃, correspondingly, variations in the hardness of the laser melted TiAl intermetallic alloy surface were also measured. The fine grain structure was considered to be a good basis of superplastic/diffusion bonding. |
| Keywords: | micro structure hardness heat treatment laser surface treatment Titanium aluminide |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 | |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 | |