| 熔体混熔制备Si相增强Al-8wt．％Si合金 |
| |
| 引用本文： | 李艳霞,张巨成,刘俊友,王敏.熔体混熔制备Si相增强Al-8wt．％Si合金[J].华北航天工业学院学报,2013(6):7-9. |
| |
| 作者姓名： | 李艳霞 张巨成 刘俊友 王敏 |
| |
| 作者单位： | [1]北华航天工业学院材料工程系,河北廊坊065000 [2]北京科技大学材料学院,北京100083 |
| |
| 基金项目： | 廊坊市科技支撵计划项目（2013011019）（2011011032） |
| |
| 摘 要： | 采用熔体混熔方法结合挤压铸造制备了Al—8wt．％Si合金。利用SEM、DSC、TEM和力学性能测试等分析手段研究了合金的组织及性能。结果显示，通过将高温的A1-30％Si合金熔体和低温的工业纯铝金属液混和，凝固形成的亚共晶成份Al.08wt．％Si合金中含有3％左右的细小初生si相。与传统熔体变质处理后制备Al．8wt．％Si合金的相比，经初生Si相增强的Al—Si合金拉伸强度达到185MPa，抗弯强度达到437MPa，分别提高15％和19％，同时延伸率增加近1倍达到6．7％。
|
| 关 键 词： | 熔体混熔 初生硅 亚共晶Al-Si合金 过共晶Al-Si合金 |
The AI-8%Si Alloy with Reinforced Phase of the Primary Silicon Prepared by the Melt Mixing |
| |
| LI Yan-xia,ZHANG Ju-cheng,LIU Jun-you,WANG Min.The AI-8%Si Alloy with Reinforced Phase of the Primary Silicon Prepared by the Melt Mixing[J].Journal of North China Institute of Astronautic Engineering,2013(6):7-9. |
| |
| Authors: | LI Yan-xia ZHANG Ju-cheng LIU Jun-you WANG Min |
| |
| Institution: | 1. Materials Engineering Department, North China Institute of Aerospace Engineering, Langfang 065000,China; 2. School of Materials Science and Engineering, University of Science and Technology, Beijing 100083,China) |
| |
| Abstract: | Al-8wt. % Si alloy was prepared by the melt mixing combined with the squeeze casting. The microstructure and properties were analyzed with the SEM, DSC,TEM and mechanical testing. The results showed that the primary silicon phase formed in the hypoeutectic Al-8wt. %Si alloy through mixing the melt of the Al-30wt. %Si alloy with the pure Al solution. Comparing with the Al-8wt. %Si alloy fabricated with the common modification treatment, the tensile strength and bend strength of Al-8wt. %Si alloy with reinforced phase of the primary silicon increased 15% and 19%, which reached 185MPa and 437MPa respectively, and the elongation of the alloy increased twice which was 6.7%. |
| |
| Keywords: | melt mixing primary silicon hypoeutectic Al-Si alloy hypereutectic Al-Si alloy |
| 本文献已被 维普 等数据库收录！ |
