首页 | 本学科首页   官方微博 | 高级检索  
     检索      

受拉螺栓表面裂纹应力强度因子的估算
引用本文:尹峰,魏玉霖.受拉螺栓表面裂纹应力强度因子的估算[J].沈阳航空工业学院学报,1994(3):14-20.
作者姓名:尹峰  魏玉霖
作者单位:沈阳航空工业学院航空工程系
摘    要:本文在实验的基础上,对螺栓螺纹根部处的表面裂纹在拉一拉载荷作用下应力强度因子K进行了初步研究,通过对已有圆柱体的表面裂纹应力强度因子公式的分析、比较,采用类比的方法,推出了受拉螺栓表面裂纹应力强度因子K的表达式,并借助于实验加以验证。

关 键 词:螺栓  表面裂纹  应力强度因子  航空附件

Evaluation of Surface Crack in the Thread Groove of Bolts Subjected to Axial Tension loading
Yin Feng,Wei Yulin,Lu Xin.Evaluation of Surface Crack in the Thread Groove of Bolts Subjected to Axial Tension loading[J].Journal of Shenyang Institute of Aeronautical Engineering,1994(3):14-20.
Authors:Yin Feng  Wei Yulin  Lu Xin
Institution:Yin Feng Wei Yulin Lu Xin
Abstract:The behaviour of surface cracks in the thread groove of bolts, Subjected to axial tension-tension loading directly applied by the nut,were experimented and estimated. Firstly the equations for stress intensity factor are developed by means of analogy for surface cracks in the thread ground of bolts under such condition. Experiments are conducted to study the fracture features and growth behavior of surface cracks in the 30 CrmnsiA bolts loaded by tension. The stress intensity factors are compared between the analytical solution and experimental results. A good agreement is achieved between the experimental result and analytical solution evaluated by using the stress intensity fac-tors'equation derived by the author.
Keywords:Bolt  surface crack  stress intensity factor
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号