| 引射式结冰风洞内圆柱结冰试验 |
| |
| 引用本文： | 孟繁鑫,陈维建,梁青森,张大林.引射式结冰风洞内圆柱结冰试验[J].航空动力学报,2013,28(7):1467-1474. |
| |
| 作者姓名： | 孟繁鑫 陈维建 梁青森 张大林 |
| |
| 作者单位： | 南京航空航天大学 航空宇航学院, 南京 210016 |
| |
| 摘 要： | 设计并建造了用于结冰研究的小型引射式结冰风洞试验系统,对其结冰气象条件参数进行了标定,给出了试验段水雾均匀区范围,验证了试验冰形的可重复性.在霜状冰和瘤状冰条件下,对直径为25.4mm和50.8mm的圆柱在所建的结冰风洞内进行了结冰试验.试验结果表明:在所研究的结冰条件和结冰时间范围内,霜状冰与瘤状冰的结冰厚度均随时间推进而线性增长;在满足结冰相似准则的情况下,冰形相似性结果良好,无量纲厚度的最大偏差约为10%.
|
| 关 键 词： | 飞机结冰 结冰试验 结冰风洞 圆柱结冰 结冰相似准则 |
| 收稿时间： | 2012/7/11 0:00:00 |
Experiment on cylinder icing in injection driven icing wind tunnel |
| |
| MENG Fan-xin,CHEN Wei-jian,LIANG Qing-sen and ZHANG Da-lin.Experiment on cylinder icing in injection driven icing wind tunnel[J].Journal of Aerospace Power,2013,28(7):1467-1474. |
| |
| Authors: | MENG Fan-xin CHEN Wei-jian LIANG Qing-sen and ZHANG Da-lin |
| |
| Institution: | College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| |
| Abstract: | Small injection driven icing wind tunnel was designed and built for icing research.Icing atmospheric conditions were calibrated and the uniformity range of icing cloud was given.Tests were conducted to validate the repeatability of ice accretions.Ice shapes on 25.4mm and 50.8mm cylinders were measured experimentally under rime and glaze icing conditions in present icing wind tunnel.Results show that the thickness of rime ice and glaze ice is linearly increased with time under the test conditions and within the icing time range.Good ice shape similarity is achieved by applying scaling equations and the maximum deviation of dimensionless thickness is about 10%. |
| |
| Keywords: | aircraft icing icing experiment icing wind tunnel cylinder icing icing similarity criterion |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
