双推力室起动同步性研究

我国新一代大推力液氧/煤油补燃发动机采用双推力室方案,发动机起动时存在推力室点火不同步情况.以500 t级液氧/煤油补燃发动机为研究对象,针对起动时推力室点火不同步问题,对发动机推力室燃料路的控制方案进行了研究.建立了描述补燃循环发动机起动过程的数学模型,搭建了双推力室发动机起动仿真平台.通过对推力室燃料路两种控制方案的对比分析：指出了从降低发动机系统对双推力室不同步点火的敏感程度考虑,采用2个燃料节流阀分别控制各分支燃料路的方案较优;推力室燃料路采用一个燃料节流阀的控制方案时,推力室冷却套流阻偏差不宜大于1 MPa.

Study on synchronous ignition of dual-thrust chamber engine

LOX/kerosene staged combustion cycle engine of 500 t thrust level is a new generationhigh thrust liquid propellant rocket engine with dual-thrust chamber system made in China. Toeliminate the asynchronous ignition of the LOX/kerosene staged combustion cycle engine withdual-thrust chamber, a control scheme for fuel pathway is investigated in this paper. A mathematicmodel describing the start-up process and a start-up simulation platform of the rocket engine withdual-thrust chamber were established. Two control schemes for fuel pathway of the thruster werecomparatively analyzed. The results show that a control scheme that two throttle valves are adoptedrespectively on corresponding branch lines is better for the purpose of reducing the sensitivity ofasynchronous ignition of dual-thrust chamber engine. The deviation of the resistance betweendual-thrust cooling jackets should be less than 1 MPa if only one throttle valve is used.