| 发射箱导轨用石墨填充碳/酚醛复合材料研究 |
| |
| 引用本文： | 唐英国,杨恒.发射箱导轨用石墨填充碳/酚醛复合材料研究[J].航天制造技术,2009(4). |
| |
| 作者姓名： | 唐英国 杨恒 |
| |
| 作者单位： | 中国三江航天集团江北机械厂; |
| |
| 摘 要： | 采用石墨填充碳/酚醛模压复合材料技术成形导轨面材料,通过试验,研究和分析了材料各组分对材料摩擦磨损性能的影响。试验结果表明,在石墨含量为10%,碳纤维含量为30%时,石墨、碳纤维填充酚醛树脂复合材料的摩擦磨损性能、烧蚀性能较好,且摩擦系数低,适于用作导轨表面材料。
|
| 关 键 词： | 发射箱导轨 石墨填充 碳/酚醛复合材料 模压 |
Research on Graphite-filled Carbon/phenolic Composite for Guide of Launch Canister |
| |
| Tang Yingguo Yang Heng.Research on Graphite-filled Carbon/phenolic Composite for Guide of Launch Canister[J].Aerospace Manufacturing Technology,2009(4). |
| |
| Authors: | Tang Yingguo Yang Heng |
| |
| Institution: | China Sanjiang Aerospace Group Jiangbei Machinery Plant;Xiaogan 432100 |
| |
| Abstract: | Graphite-filled carbon/phenolic composite molding technology is adopted to form guide surface materials.Through the tests,effects of each component on friction and wear properties of the materials are analyzed.The results show that optimal performance of friction and wear and ablation as well as low friction coefficient can be obtained when the composite is prepared with graphite content of 10% and carbon fiber content of 30%,which is suitable for guide surface materials. |
| |
| Keywords: | guide of launch canister filled with graphite carbon/phenolic composite mould pressing |
| 本文献已被 CNKI 等数据库收录！ |
