| 水冲压发动机补燃室铝水燃烧分析 |
| |
| 引用本文： | 霍东兴,何国强,陈林泉,任全彬.水冲压发动机补燃室铝水燃烧分析[J].固体火箭技术,2009,32(2). |
| |
| 作者姓名： | 霍东兴 何国强 陈林泉 任全彬 |
| |
| 作者单位： | 1. 西北工业大学航天学院,西安,710072
2. 中国航天科技集团公司四院四十一所,固体火箭发动机燃烧热结构与内流场国防科技重点实验室,西安710025 |
| |
| 摘 要： | 铝粉在水蒸气中燃烧时间的测定是非常复杂和困难的,文中对几种燃烧模型进行了对比计算.结果表明,各种模型的计算结果相差较大.在对比分析的基础上,采用了Brooks模型来计算燃烧时间,并由此获得了颗粒轨道模型中所需的计算参数.对某试验发动机的补燃室流场进行计算,获得的温度场与试验结果相吻合,说明这种处理方法是合理的.所建立的水冲压发动机补燃室的数值模型为补燃室燃烧组织的深入研究提供了参考.
|
| 关 键 词： | 水冲压发动机 补燃室 铝水反应 燃烧模型 |
Analysis on aluminum-water combustion in afterburner of water ramjet |
| |
| HUO Dong-xing,HE Guo-qiang,CHEN Lin-quan,REN Quan-bin.Analysis on aluminum-water combustion in afterburner of water ramjet[J].Journal of Solid Rocket Technology,2009,32(2). |
| |
| Authors: | HUO Dong-xing HE Guo-qiang CHEN Lin-quan REN Quan-bin |
| |
| Institution: | HUO Dong-xing~1,HE Guo-qiang~1,CHEN Lin-quan~2,REN Quan-bin~2 (1.Coll.of Astronautics,Northwestern Polytechnical Univ,Xi'an 710072,China,2.National Key Laboratory of Combustion,Flow and Thermo-Structure,The 41st Institute of the Fourth Academy of CASC,Xi'an 710025,China) |
| |
| Abstract: | It is very complex and difficult to measure combustion time of aluminum particles in steam.The comparative calculations of several combustion models indicated that there exist greater differences among them.Based on comparative analysis,the combustion time was calculated by means of Brooks model,and other parameters of the particle-trajectory models were obtained. The flow field of afterburner of a water ramjet was numerically simulated and the calculated temperature field was in agreement with the test res... |
| |
| Keywords: | water ramjet afterburner aluminum-water reaction combustion model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
