| 铝蜂窝夹层板热管区域平面度控制方法研究 |
| |
| 引用本文： | 韦璐明,李玲,沈辉,邱保强.铝蜂窝夹层板热管区域平面度控制方法研究[J].宇航材料工艺,2017,47(2):51-55. |
| |
| 作者姓名： | 韦璐明 李玲 沈辉 邱保强 |
| |
| 作者单位： | 上海复合材料科技有限公司, 上海 201112;上海航天树脂基复合材料工程技术研究中心, 上海 201112,上海复合材料科技有限公司, 上海 201112;上海航天树脂基复合材料工程技术研究中心, 上海 201112,上海复合材料科技有限公司, 上海 201112;上海航天树脂基复合材料工程技术研究中心, 上海 201112,上海复合材料科技有限公司, 上海 201112;上海航天树脂基复合材料工程技术研究中心, 上海 201112 |
| |
| 摘 要： | 主要研究蜂窝板热管区域局部平面度超差的原因及控制方法。经分析,蜂窝叠块的尺寸精度以及胶膜固化后的厚度不均匀性是导致超差的主要原因,通过提高工装均压板的厚度,利用胶膜厚度的自适应性弥补零部件尺寸累积偏差,提高平面度,并对新方法下产品剥离、剪切强度进行测试,结果表明,该工艺方法可以在不影响产品力学性能的前提下大幅改善产品热管区域平面度。
|
| 关 键 词： | 蜂窝结构板 热管 胶膜 平面度 |
| 收稿时间： | 2016/12/3 0:00:00 |
Analysis and Solution on Heat Pipe Area Flatness Tolerance for Honeycomb Sandwich Panel |
| |
| WEI Luming,LI Ning,SHEN Hui and QIU Baoqiang.Analysis and Solution on Heat Pipe Area Flatness Tolerance for Honeycomb Sandwich Panel[J].Aerospace Materials & Technology,2017,47(2):51-55. |
| |
| Authors: | WEI Luming LI Ning SHEN Hui and QIU Baoqiang |
| |
| Institution: | Shanghai Composite Material Science & Technology Co., Ltd, Shanghai 201112;Shanghai Engineering Technology & Research Center of Aerospace Resin Based Composites, Shanghai 201112,Shanghai Composite Material Science & Technology Co., Ltd, Shanghai 201112;Shanghai Engineering Technology & Research Center of Aerospace Resin Based Composites, Shanghai 201112,Shanghai Composite Material Science & Technology Co., Ltd, Shanghai 201112;Shanghai Engineering Technology & Research Center of Aerospace Resin Based Composites, Shanghai 201112 and Shanghai Composite Material Science & Technology Co., Ltd, Shanghai 201112;Shanghai Engineering Technology & Research Center of Aerospace Resin Based Composites, Shanghai 201112 |
| |
| Abstract: | Apparatus losing heat by fitting with heat pipe embedded in honeycomb sandwich panel.This article aimed to analyze the factors affecting the heat pipe area flatness in honeycomb sandwich panel.The dimensional precision of honeycomb core and the uneven thickness of adhesive film panel after curing are the main causes. The main solution carried out is increasing the thickness of average pressure tooling board, which can compensate the parts'' cumulative dimensional deviation by adhesive film. The results showed that method could be applied to practical production. |
| |
| Keywords: | Honeycomb sandwich panel Heat pipe Adhesive film Flatness |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|
