| 2524与7150铝合金激光焊T型接头的组织与性能 |
| |
| 引用本文： | 郭辉华,李明仁,黄建科,徐亮,肖荣诗.2524与7150铝合金激光焊T型接头的组织与性能[J].宇航材料工艺,2017,47(4):55-58. |
| |
| 作者姓名： | 郭辉华 李明仁 黄建科 徐亮 肖荣诗 |
| |
| 作者单位： | 上海飞机设计研究院, 上海 201210,上海飞机设计研究院, 上海 201210,上海飞机设计研究院, 上海 201210,上海飞机设计研究院, 上海 201210,北京工业大学, 北京 100124 |
| |
| 摘 要： | 介绍了2524与7150铝合金激光焊T型接头优化的工艺参数,并研究了T型接头在优化工艺下的显微组织与力学性能,进行金相分析、显微硬度测试与接头拉伸试验。结果表明:优化工艺下焊缝没有裂纹、气孔,金相组织晶粒细小、致密,焊缝区域的硬度最低;T型接头x方向的拉伸强度达到384 MPa,z方向的拉伸强度为236 MPa。
|
| 关 键 词： | 2524与7150铝合金 激光焊接 T型接头 拉伸强度 |
| 收稿时间： | 2017/6/6 0:00:00 |
Microscopic Analysis and Mechanical Properties of Laser Beam Welded T Joint for 2524 and 7150 Aluminum Alloys |
| |
| GUO Huihu,LI Mingren,HUANG Jianke,XU Liang and XIAO Rongshi.Microscopic Analysis and Mechanical Properties of Laser Beam Welded T Joint for 2524 and 7150 Aluminum Alloys[J].Aerospace Materials & Technology,2017,47(4):55-58. |
| |
| Authors: | GUO Huihu LI Mingren HUANG Jianke XU Liang and XIAO Rongshi |
| |
| Institution: | Shanghai Aircraft Design and Research Institute, Shanghai 201210,Shanghai Aircraft Design and Research Institute, Shanghai 201210,Shanghai Aircraft Design and Research Institute, Shanghai 201210,Shanghai Aircraft Design and Research Institute, Shanghai 201210 and Beijing University of Technology, Beijing 100124 |
| |
| Abstract: | Optimum process parameters of laser beam welded T joints for 2524 and 7150 aluminum alloys are investigated in this paper. The microscopic structure and mechanical properties for T joints are studied by metallographic analysis, microhardness and tensile test. Test results show the grain in welding seam is fine and dense.The microhardness is lowest in welding seam. The tensile properties for joints in x direction is 384 MPa, while in z direction is 236 MPa. |
| |
| Keywords: | 2524 and 7150 Aluminum alloys Laser beam welding T joint Tensile strength |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 |
|
