| 安装位置导管感应钎焊 |
| |
| 引用本文： | 张伟,齐铂金,金玉兰,张瑾.安装位置导管感应钎焊[J].北京航空航天大学学报,2005,31(2):242-246. |
| |
| 作者姓名： | 张伟 齐铂金 金玉兰 张瑾 |
| |
| 作者单位： | 北京航空航天大学 机械工程及自动化学院, 北京 100083 |
| |
| 摘 要： | 在某型号飞机的总装现场,部分导管的连接是在飞机上装配焊接而成的,传统固定式感应钎焊设备已经不能满足现场安装焊接工艺的要求.针对安装位置导管感应钎焊的特点,研究开发了专用的低损耗功率延伸电缆、钎焊温度的光纤实时测量与控制系统,以及大功率超音频感应加热逆变电源等相关技术,在此基础上研制出了一套安装位置导管感应钎焊设备,并且完成了飞机装配现场的工艺研究.结果表明:该设备及其成套技术完全能够满足导管接头焊接质量的要求,已经成功应用到了该型号飞机安装位置导管钎焊生产线上.
|
| 关 键 词： | 感应钎焊 导管连接 逆变电源 温度控制 功率延伸电缆 |
| 文章编号： | 1001-5965(2005)02-0242-05 |
| 收稿时间： | 2004-06-20 |
| 修稿时间： | 2004年6月20日 |
On-site induction brazing of tubes |
| |
| Zhang Wei,Qi Bojin,Jin Yulan,Zhang Jin.On-site induction brazing of tubes[J].Journal of Beijing University of Aeronautics and Astronautics,2005,31(2):242-246. |
| |
| Authors: | Zhang Wei Qi Bojin Jin Yulan Zhang Jin |
| |
| Institution: | School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China |
| |
| Abstract: | In a plane factory, some tubes connection is in the plane by welding. Traditional induction brazing device with a fixed coil could not adapt this new process. Considering the characteristic of on-site induction brazing of tubes, a set of equipment and related technologies were developed, including a special low loss connecting power cable,a precise measurement and control system of brazing temperature with a fiber,and an ultrasonic induction heating inverter, and necessary experiments were done. The results show that this device and related technologies can satisfy the welding quality and is successfully applied in the factory. |
| |
| Keywords: | induction brazing tubes connection inverters temperature control connecting power cable |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
