| DZ40M合金缺陷试样TLP-DB接头力学性能研究 |
| |
| 引用本文： | 张蕾,张海艳,侯金保. DZ40M合金缺陷试样TLP-DB接头力学性能研究[J]. 航空制造技术, 2012, 0(13): 134-136,144 |
| |
| 作者姓名： | 张蕾 张海艳 侯金保 |
| |
| 作者单位： | 中航工业北京航空制造工程研究所 |
| |
| 摘 要： | 开展定向凝固钴基高温合金DZ40M的过渡液相扩散焊试验,研究不同界面缺陷率DZ40M合金TLP-DB接头的高温力学性能。结果表明:采用1260℃/0.5h+1200℃/6h规范可实现DZ40M合金过渡液相扩散焊的良好结合;接头高温持久强度达到等条件下母材的70%以上;当界面缺陷率达15%时,接头高温持久强度仍达到母材的70%以上;但随着缺陷比例的增大,断裂位置由母材转移到焊缝。
|
| 关 键 词： | 定向凝固 钴基高温合金DZ40M 过渡液相扩散焊(TLP-DB) 缺陷率 持久强度 |
Study on Mechanical Property of DZ40M Defective TLP-DB Joint |
| |
| Abstract: | The transient liquid phase diffusion Bonding tests are carried out to study the elevated temperature mechanical properties of directionally-solidified Cobalt-based superalloy DZ40M defective TLP-DB joints. The results show that the DZ40M superalloy can be bonded soundly by using TLP-DB method under optimized parameters: 1260 ℃ /0.5h+1200 ℃ /6h. The joint elevated stress-rupture strength at 815 ℃ reaches 70% above of that of the base metal. The joint stress-rupture strength still reaches 70% above of that of the base metal when the rate of defect is 15%. With the rate of defect increasing, the fracture position appears from the base metal to the welded seam. |
| |
| Keywords: | Directionally-solidification Cobalt-based superalloy DZ40M Transient liquid phase diffusion bonding(TLP-DB) Rate of defect Stress-rupture strength |
| 本文献已被 CNKI 等数据库收录！ |
