|
|||||
|
|
| 碳纤维复合材料孔加工质量试验研究 | |
| 引用本文： | 王,震.碳纤维复合材料孔加工质量试验研究[J].宇航材料工艺,2013,43(6). |
| 作者姓名： | 王 震 |
| 作者单位： | 北京卫星制造厂 |
| 摘 要： | 碳纤维复合材料零件上存在大量的装配工艺孔,采用传统孔加工方式过程中容易导致分层、纤维 撕裂等缺陷. 本文通过钻削和螺旋铣削方式加工碳纤维复合材料(CFRP),对比两种孔加工方法的加工质量, 分析了缺陷存在的原因,发现在碳纤维复合材料上采用螺旋铣削制孔方式是可行的,对碳纤维复合材料孔加工 工艺具有一定的参考价值。 |
| 关 键 词： | 碳纤维复合材料 钻孔 螺旋铣削 |
Experimental Research on The Quality of The Hole-Making inCarbon Fiber Reinforced Plastic |
|
| Institution: | Beijing Spacecrafts |
| Abstract: | There are many holes used for assembly in carbon fiber reinforced plastic (CFRP) parts, traditional hole-making method is subject to various damages such as delamination and fiber pullout. In this paper, drilling and helical milling CFRP are carried out, according to comparison of the machining quality of two hole-making method, the reason of the machining defect is analyzed. It was found that helical milling is a feasible method in hole-making, which has a broad applied value in the CFRP hole-making technology. |
| Keywords: | CFRP Drilling Helical milling |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 | |
| 点击此处可从《宇航材料工艺》下载免费的PDF全文 | |