| 四轴WEDM机床锥度切割运动分析 |
| |
| 引用本文： | 王旭亮,谷安.四轴WEDM机床锥度切割运动分析[J].南京航空航天大学学报(英文版),2006,23(2):149-153. |
| |
| 作者姓名： | 王旭亮 谷安 |
| |
| 作者单位： | 1. 南京航空航天大学航空宇航学院,南京,210016,中国
2. 南京航空航天大学机电学院,南京,210016,中国 |
| |
| 摘 要： | 介绍了四轴WEDM机床的结构和坐标系统，在分析了四轴WEDM机床运动的基础上，提出了一种在等锥度和变锥度情况下均适用的四轴运动控制方法。通过这一方法，由工件下表面加工轨迹和锥度角推导出工作台和上导丝嘴的运动轨迹，并应用于四轴WEDM机床计算机数控系统中。实验证明该方法正确有效。
|
| 关 键 词： | 锥度 四轴联动 运动分析 |
| 收稿时间： | 12 6 2005 12:00AM |
| 修稿时间： | 03 28 2006 12:00AM |
MOTION ANALYSIS OF TAPER MACHINING USING FOUR-AXIS WEDM MACHINE TOOL |
| |
| Wang Xuliang,Gu An.MOTION ANALYSIS OF TAPER MACHINING USING FOUR-AXIS WEDM MACHINE TOOL[J].Transactions of Nanjing University of Aeronautics & Astronautics,2006,23(2):149-153. |
| |
| Authors: | Wang Xuliang Gu An |
| |
| Institution: | 1. College of Aerospace Engineering, NUAA, 29 Yudao Street, Nanjing, 210016, P. R. China; 2. College of Mechanical and Electrical Engineering, NUAA, 29 Yudao Street, Nanjing, 210016, P. R. China |
| |
| Abstract: | The configuration and the reference frame of the four-axis wire-electric discharge machining (WEDM) machine tool are introduced. Based on the motion analysis of the four-axis WEDM machine tool, an algorithm for controlling the four-axis motion is proposed. The algorithm is applicable to both the invariable and variable taper machining. Motion loci of the machining platform and the wire guiding head are deduced by the algorithm according to the bottom surface locus of the workpiece and the taper angle. The algorithm is used in the CNC system of the four-axis WEDM machine tool and confirmed to be effective. |
| |
| Keywords: | WEDM WEDM taper four-axis simultaneous motion motion analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
