激光快速成形Inconel 718拉伸性能和ANSYS模拟分析研究 |
| |
引用本文: | 张芳.激光快速成形Inconel 718拉伸性能和ANSYS模拟分析研究[J].航空精密制造技术,2016(6). |
| |
作者姓名: | 张芳 |
| |
作者单位: | 中航工业北京航空制造工程研究所,北京,100024 |
| |
摘 要: | 采用激光快速成形技术制成Inconel718材料,对其拉伸性能和微观组织进行分析。结果表明,其拉伸性能和微观组织均具有各向异性。采用ANSYS分析软件得出试样拉伸应力分布图,通过模拟数据与试验数据对比,两者应力-应变曲线得到很好吻合,为Inconel718材料复杂机械构件在研制阶段通过有限元分析提供设计依据。
|
关 键 词: | 激光快速成形 Inconel 718 ANSYS 拉伸性能 |
Reseaech on Tensile Properties and ANSYS Simulation Analysis of Inconel 718 by Laser Rapid Forming Process |
| |
Abstract: | Inconel 718 was made by laser rapid forming technology. The tensile properties and microstructures were analyzed. It is showed that the tensile properties and microstructures are anisotropy. The specimen tensile-stress distribution was obtained by simulation software ANSYS. By comparing the simulation data with the experimental data, both the stress-strain curves in good agreement, it is provide the design basis for the complex mechanical components of Inconel 718 material in the development stage through ifnite element analysis. |
| |
Keywords: | laser rapid forming Inconel 718 software ANSYS tensile property |
本文献已被 万方数据 等数据库收录! |