首页 | 本学科首页   官方微博 | 高级检索  
     检索      

Aerodynamic force and moment measurement of 10° half-angle cone in JF12 shock tunnel
摘    要:An aerodynamic force and moment measurement was conducted in JF12 long-testduration detonation-driven shock tunnel of Institute of Mechanics,Chinese Academy of Sciences.The test duration of JF12 is 100–130 ms.The nominal Mach number is 7.0 and the exit diameter of the contoured nozzle is 2.5 m.The total enthalpy is 2.5 MJ/kg which duplicates the hypersonic flight conditions of Mach number 7.0 at 35 km altitude.The test model is the standard aerodynamic force model of 10° half-angle sharp cone.The length of the test model is 1500 mm and the weight is 57 kg.The aerodynamic forces were measured with a six-component strain balance.The angles of attack were set to be à5°,0°,5°,10° and 14°,respectively.The experimental results show that in the 100–130 ms test duration,the signals of strain balance have 3–4 complete vibration cycles.So,the aerodynamic forces and moments can be obtained directly by averaging the signals of balance without acceleration compensation.The force measurement error of repeatability of JF12 is less than 2%.The aerodynamic force coefficients of JF12 are in good agreement with those of conventional hypersonic wind tunnels.For this test model at Mach number 7.0 and total enthalpy of 2.5 MJ/kg,the real-gas effects on aerodynamic force characteristics are not very evident.


Aerodynamic force and moment measurement of 10° half-angle cone in JF12 shock tunnel
Authors:Yunfeng LIU  Yunpeng WANG  Chaokai YUAN  Changtong LUO  Zonglin JIANG
Institution:State Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Academy of Sciences,Beijing 100190, China
Abstract:An aerodynamic force and moment measurement was conducted in JF12 long-testduration detonation-driven shock tunnel of Institute of Mechanics,Chinese Academy of Sciences.The test duration of JF12 is 100-130 ms.The nominal Mach number is 7.0 and the exit diameter of the contoured nozzle is 2.5 m.The total enthalpy is 2.5 MJ/kg which duplicates the hypersonic flight conditions of Mach number 7.0 at 35 km altitude.The test model is the standard aerodynamic force model of 10° half-angle sharp cone.The length of the test model is 1500 mm and the weight is 57 kg.The aerodynamic forces were measured with a six-component strain balance.The angles of attack were set to be-5°,0°,5°,10° and 14°,respectively.The experimental results show that in the 100-130 ms test duration,the signals of strain balance have 34 complete vibration cycles.So,the aerodynamic forces and moments can be obtained directly by averaging the signals of balance without acceleration compensation.The force measurement error of repeatability of JF12 is less than 2%.The aerodynamic force coefficients of JF12 are in good agreement with those of conventional hypersonic wind tunnels.For this test model at Mach number 7.0 and total enthalpy of 2.5 MJ/ kg,the real-gas effects on aerodynamic force characteristics are not very evident.
Keywords:Aerodynamic force and moment measurement  10° half-angle cone model  JF12  Real-gas effects  Shock tunnel
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号