一种用于导弹末制导的线性化控制方法

针对包含未知参数的导弹运动非线性模型,提出了一种用于末制导的线性化反馈简化控制方法。在模型中引入附加加速度输出,通过消除内反馈和零极点以输入-输出的近似线性控制导弹的非线性运动。给出了控制模型及其构成。仿真结果表明,该方法的反应速度快、稳定性好,控制精度满足要求,可用于导弹跟踪飞行控制。     

一种基于反馈精确线性化的空间拦截末制导律

本文用反馈线性化理论研究了一种空间末制导模型，提出了非线性末制导律，并进行了数字仿真。     

非线性PD型比例导引鲁棒性研究

为研究存在视线角速度测量噪声时非线性比例微分(PD)型比例制导方案的鲁棒性,以近距大离轴角发射和目标大机动为拦截条件,对四种视线角速度测量噪声方差进行蒙特卡罗仿真模拟。结果表明,非线性PD型比例制导方案抗视线角速度测量噪声的鲁棒性强,对机动目标拦截制导精度高,是一种具工程应用价值的高精度末制导方案。     

基于快速终端滑模的模糊逼近系统及其应用

为改善模糊系统逼近的收敛速率,提出了一种基于快速终端滑模的反向传播(BP)学习算法。将快速终端滑模引入模糊逻系统的学习算法,综合终端吸引子有限时间收敛和线性系统指数收敛的性质,提高了对非线性连续函数的逼近能力。仿真结果表明:该算法能以较快速率逼近未知函数,且逼近过程稳定,较普通学习算法更为精确和有效。     

高超声速滑翔再入定向定速打击末制导算法

以具有终端落角和落速约束的小升阻比短距滑翔高超声速再入打击飞行器为研究对象，通过引入弹道调整段来实现对飞行器的初步大幅度减速，并使其满足中末制导交班条件，以解决飞行器捕获目标后难以直接对其进行定向定速打击的问题。首先设计了一种变角偏差反馈系数的偏置比例制导律，解决了末端攻击段弹道下压困难以及导引头视场稳定跟踪等问题。在此基础上，建立了一种基于攻角和弹道倾角估计的末端减速指令生成方法，有效解决了基于理想速度曲线减速控制方法精度不足的问题。因此，数值仿真结果表明该制导方案能够有效控制飞行器终端落角和落速，并具有较高的制导精度。     

高度-速度剖面内再入轨迹快速规划

提出一种升力式再入航天器进入稠密大气后的轨迹规划方法。在预先设定攻角剖面的前提下，利用路径约束(驻点热流、动压和过载)在高度-速度(H-V)剖面内直接获得轨迹下边界；利用终端约束确定以轨迹下边界为基准的高度增量，进而通过下边界与高度增量的加和形成满足要求的再入轨迹。其中，增量的形式选取为分段二次型函数，其大小可通过割线法快速获得。倾斜角大小可根据纵向动力学方程反解得到，其方向依据航向误差角走廊确定。通过对典型工况的仿真，结果表明所提方法能够快速规划出再入轨迹，且适应性好。     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

基于改进Canny的激光主动成像图像边缘检测算法研究

针对传统Canny边缘检测算法存在的不足,结合激光主动成像末制导的实际特点,提出了一种改进的Canny边缘检测算法.该算法在Canny边缘检测算法的基础上,采用同态滤波和提升小波变换级联的方法代替传统的高斯滤波器;采用3×3邻域的权值梯度计算方法代替原有的2×2邻域差分运算;采用Otsu自适应阈值计算方法,使算法可根据图像自身特点选择最合适的阈值.实验证明:该算法提升了传统Canny算子的抗干扰能力和鲁棒性,能够较好地保存边缘信息,准确检测出激光主动成像图像的边缘,具有较强的自适应性.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

反舰导弹末端机动的突防效果研究

利用共轭系统和拉氏变换技术,重点研究了反舰导弹的螺旋机动和摆式机动的突防效果。螺旋机动和摆式机动的加速度可以用纵向和航向平面内的加速度分量来表示。在平面内分析机动加速度引起的稳态脱靶量得到了简单的脱靶量解析解。利用该解析解,分析了机动持续时间对稳态脱靶量的影响。将纵向和航向平面内的稳态脱靶量综合起来得到了螺旋机动或者摆式机动所引起的稳态脱靶量。仿真结果表明这两种非平面机动方式比平面机动方式具有更好的突防效果。