航空专用测试设备校准问题的研究

简要介绍了航空专用测试设备的概念,在计量、校准中遇到的问题以及解决问题的途径。     

感应电动机寿命预测的加速退化试验方法研究

感应电动机正常使用时一般具有长寿命高可靠性,为在较短时间内预测感应电动机的寿命,提出了一种简单易行的感应电动机加速退化试验方法:在电动机转轴上偏心安装圆孔叶片模拟电动机负载工作时承受的不平衡载荷,并且通过改变叶片偏心安装孔的位置模拟增大不平衡载荷。进行了3种应力形式的试验研究,以试验中测得的电动机轴心轨迹面积值表征电动机的性能退化指标,建立了轴心轨迹面积相对变化的漂移Brown运动和幂律加速退化模型,利用无偏估计法和最小二乘法得到模型参数的估计,外推获得叶片无偏心安装状态下的不平衡重力矩,以该值作为电动机正常工作时承受的不平衡载荷,预测和分析了电动机正常工作寿命和可靠性,验证了加速退化试验方法的可行性和高效性。     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

利用导弹制导误差补偿规律修正不完全弹道测量的数据融合技术

论述不完全弹道测量的数据融合处理问题。在惯性器件天地关系一致的前提下,导弹惯性器件误差补偿量变化规律,就反映了飞行中制导工具误差的变化规律,即遥外差的变化规律。因此,可以利用补偿量视速度的变化规律约束条件,内插出不完全测量段落的遥外差数据,在建立节省参数的弹道估计的联合模型基础上,融合少量的高精度测元来解算弹道参数。落点验算表明：利用该方法计算的落点接近实际落点。     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

民机防冰系统自然结冰试飞技术研究

结合某型民机自然结冰条件下防冰系统的试飞,对试飞所需的测试改装工作进行了总结,并对试飞前需进行的各种安全性评估进行了总结说明,明确了试飞中需考虑的各种构型情况,提出一套循序渐进的自然结冰试飞方法。同时提出了试飞中结冰气象参数的可接受性判据,最后针对自然结冰试飞中结冰气象参数的处理提出了分段等效处理的方法。     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

挠性空间结构的H∞辨识

重点研究挠性空间结构的Ｈ∞辨识，研究表明：依据系统的输入输出空间，对系统的未知动力学参数估计和对高维数截断的适当操作，将导致适合于控制的低维数学模型。模型维数确定时，系统模型与实际系统的距离在Ｈ∞范数的意义下几乎为最小，模型维数足够大时，系统模型与实际系统的距离可任意小，这是文下间提出了挠性空间结构Ｈ∞辨识的基本思想，为此，以带挠性梁的卫星系统为背景，首先分析了系统的动力学特性，引入了挠性系统Ｈ∞     

Spatial transformation of general sampling-aliasing frequency region for rotating-blade parameter identification with emphasis on single-probe blade tip-timing measurement

Blade-health monitoring is intensely required for turbomachinery because of the high failure risk of rotating blades. Blade-Tip Timing (BTT) is considered as the most promising technique for operational blade-vibration monitoring, which obtains the parameters that characterize the blade condition from recorded signals. However, its application is hindered by severe undersampling and stringent probe layouts. An inappropriate probe layout can make most of the existing methods invalid or inaccurate. Additionally, a general conflict arises between the allowed and required layouts because of arrangement restrictions. For the sake of economy and safety, parameter identification based on fewer probes has been preferred by users. In this work, a spatial-transformation-based method for parameter identification is proposed based on a single-probe BTT measurement. To present the general Sampling-Aliasing Frequency (SAFE) map definition, the traditional time–frequency analysis methods are extended to a time-sampling frequency. Then, a SAFE map is projected onto a parameter space using spatial transformation to extract the slope and intercept parameters, which can be physically interpreted as an engine order and a natural frequency using coordinate transformation. Finally, the effectiveness and robustness of the proposed method are verified by simulations and experiments under uniformly and nonuniformly variable speed conditions.     

一种基于参数控制的低轨星载接收机载波跟踪算法CSCD

低轨星座接收机面临大多普勒频移及频繁快速换星等设计约束,对其载波跟踪环路设计提出了较高的动态适应性与跟踪精度要求。针对以上问题,提出了一种基于参数控制的载波跟踪算法。该算法引入环路控制因子参数,将环路滤波器分为牵引和跟踪两阶段。基于理论建模推导环路控制因子的最优参数配置原则,指导实现牵引和跟踪两种状态滤波器的协同配合,在牵引阶段有效引导大多普勒信号快速入锁,在跟踪阶段精确估计载波频移参数,实现基于低轨星载平台的GNSS信号快速准确跟踪。理论与仿真结果均表明基于参数控制的载波跟踪算法能够有效提升环路的动态适应性与跟踪精度,满足低轨星载接收机的设计需求。与传统算法相比,该算法在保证信号跟踪精度的同时,能够将收敛时间缩短78%,且环路设计简单,易于硬件实现。