排序方式: 共有39条查询结果,搜索用时 15 毫秒
1.
2.
Alireza A. Ardalan Iraj Jazireeyan Naser Abdi Mohammad-Hadi Rezvani 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2018,61(6):1537-1545
Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions. 相似文献
激光陀螺的高频机抖使得激光陀螺惯性测量单元(IMU)的测量数据包含较大的随机噪声。传统标定方法通过延长测量时间消除对随机噪声的影响,降低了标定效率。提出了应用自适应前向线性预测(FLP)滤波对激光陀螺IMU的标定数据进行降噪,在较小标定数据量情况下提高系统的标定精度。首先通过四方位正反速率标定试验获得原始标定数据;然后通过自适应FLP滤波器对标定数据进行噪声抑制;最后利用降噪后的数据计算标定参数。试验结果表明,该方法能够有效抑制标定数据中的随机噪声,提高信号的信噪比(SNR),从而在标定数据量较小的情况下得到较高精度的标定参数,提升系统的导航精度。 相似文献
4.
惯组作为飞行器姿控系统的传感器,其局部安装结构的传递特性的测量精度直接关系到导航精度。目前,惯组普遍使用减振器进行隔振,而减振器都呈现出较强的非线性特征。为了考察惯组在不同工况下的传递特性,将惯组简化为六自由度Duffing模型,推导了基础激励下系统的运动微分方程,并用龙格-库塔法对方程进行求解,分析了自由衰减振动和强迫振动下不同工况的系统传递特性。结果表明,多自由度激励比单自由度激励工况得到的系统传递特性的频率和幅值都低。考虑到惯组真实的使用环境,应当在多自由度振动环境下进行传递特性试验。 相似文献
5.
基于单目视觉与惯性测量单元(IMU)融合的SLAM(simultaneous localization and mapping)技术,具有硬件成本低、体积小和消耗计算资源少等优点,在移动机器人导航系统中得到了广泛的应用。单目视觉SLAM系统主要通过求解对极几何来解算位姿,但当平移为零时(仅存在姿态旋转运动),存在解算漂移的问题。通过将磁力计的数据融合到单目视觉SLAM算法中,不但可以解决纯旋转情况下姿态解算漂移问题,还可以提高解算精度。物理仿真实验的结果表明,与传统的SLAM算法相比,本文提出的基于磁力计、IMU和单目视觉融合的算法具有精度高、鲁棒性好的优点。 相似文献
6.
针对小口径管道的测绘问题,提出了一种MEMS惯测装置在小管道测绘系统中应用的方法,直接利用地标点信息为MEMS惯测装置装订初始方位,采用因子图理论对惯性/里程计组合导航信息进行处理,通过后续处理对装订误差进行修正,解决了MEMS惯测装置无法完成初始对准的问题。给出了惯性/里程计组合导航的因子图以及和积算法递推公式,并通过牵引试验对所提方法进行了验证。试验结果表明,提出的应用方法能够有效解决小口径管道的测绘问题,在100m间隔的路标点条件下,单边定位精度能够达到5cm。 相似文献
7.
8.
9.
10.
针对飞行器升降舵、副翼角运动的测试需求,提出了单轴捷联姿态系统的原理及算法,介绍了基于MEMS陀螺仪和加速度计的舵面运动测量仪的构成,并对测量仪的工作过程进行了仿真.仿真表明,测量仪的性能满足舵面运动测量的需要. 相似文献