传输型光学遥感器斜模式采样新方法研究

文章介绍了实现超模式采样焦平面3种解决方案面临的技术难点，为避开器件问题提出了一种新的斜模式采样方法。以任意两维周期采样理论为基础分析了斜模式采样技术的物理原理，并通过实验手段验证了斜模式采样技术的可行性。试验结果表明：改变探测器推扫方向的采样间距符模式采样技术可以提高传输型光学遥感器图像的空间分辨率，该技术相对于超模式采样技术，工程实现上要简单。     

提高航天传输型CCD相机地面像元分辨率方法研究

文章首先对空间传输型遥感相机提高像元分辨率的几种常规和非常规方法做了简介,在分析这些方法的优缺点以及以采样定理为依据分析我国现有CCD相机光学截止频率和CCD采样频率存在的矛盾的基础上探讨了高模式采样技术和超模式采样技术,经过比较这两种采样模式,认为超模式采样技术更具有工程可行性和优越性。然后对超模式采样计算机图像仿真结果进行了分析。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

正弦压力信号幅值测量无差算法研究

正弦压力校准常用比较法，通过比较标准压力传感器与被校压力传感器在同一正弦压力源中的响应完成被校传感器的幅值校准。对正弦压力信号幅值的测量算法进行了研究，提出了一种控制采样频率为标准激励信号频率整数倍的算法，可实现幅值的无差运算，理论推导和仿真实验表明，该算法能有效提高单频校准的准确度。     

Relevant experience learning: A deep reinforcement learning method for UAV autonomous motion planning in complex unknown environments

Unmanned Aerial Vehicles (UAVs) play a vital role in military warfare. In a variety of battlefield mission scenarios, UAVs are required to safely fly to designated locations without human intervention. Therefore, finding a suitable method to solve the UAV Autonomous Motion Planning (AMP) problem can improve the success rate of UAV missions to a certain extent. In recent years, many studies have used Deep Reinforcement Learning (DRL) methods to address the AMP problem and have achieved good results. From the perspective of sampling, this paper designs a sampling method with double-screening, combines it with the Deep Deterministic Policy Gradient (DDPG) algorithm, and proposes the Relevant Experience Learning-DDPG (REL-DDPG) algorithm. The REL-DDPG algorithm uses a Prioritized Experience Replay (PER) mechanism to break the correlation of continuous experiences in the experience pool, finds the experiences most similar to the current state to learn according to the theory in human education, and expands the influence of the learning process on action selection at the current state. All experiments are applied in a complex unknown simulation environment constructed based on the parameters of a real UAV. The training experiments show that REL-DDPG improves the convergence speed and the convergence result compared to the state-of-the-art DDPG algorithm, while the testing experiments show the applicability of the algorithm and investigate the performance under different parameter conditions.     

压缩空气中悬浮油检测采样方法研究

设计了一套压缩空气中悬浮油检测的采样方法,并对该方法的采样时间、采样流量、采样吸收效率等进行了定量化试验和论证,确认了该方法的适用性。     

测控任务可靠性的近似零方差重要抽样仿真

评价航天测控方案中的测控任务可靠性需要高效的方法,解析法和直接仿真都不能满足该要求。在介绍测控任务模型及其可靠性直接仿真法的基础上,基于不交化最小割集设计了实现近似零方差重要抽样的方法,并给出不交化最小割集的获取算法。通过案例分析,得出不交化最小割集最大获取数量越大,仿真收敛性越好,但相应地耗时也越多的结论。因此,实际应用中,需要在不交化最小割集获取数量与仿真时间二者间进行权衡。     

一种复合的SAR压制干扰方法研究

覆盖式干扰是一种对合成孔径雷达有效的干扰样式,有效覆盖面积是评价覆盖干扰效果的重要指标之一,如何有效地对干扰范围进行扩展是研究的热点问题,具有较高的研究价值。在介绍3种不同干扰方法的原理与干扰效果之后,对方法进行了结合,提出了1种可以有效扩展干扰区域范围的干扰模型。方法以二维锯齿调频干扰为基础,利用频移干扰扩展距离向干扰区域,利用方位向间歇采样技术扩展方位向干扰区域。不仅原理简单,更加利于工程实现。最后,利用单一点目标对方法进行了验证,仿真实验的结果证实了方法的准确性与可靠性。     

In situ analysis of Europa ices by short-range melting probes

A key aspect for understanding the astrobiological potential of planets and moons in the Solar system is the analysis of material embedded in or underneath icy layers on the surface. In particular in case of the icy crust of Jupiters moon Europa such investigation would be of greatest interest. For a Europa lander to be launched in the 2020–2030 timeframe, we propose to use a simplified instrumented melting probe which is able to access and sample depths of a few meters without the necessity of heavy and complicated drilling equipment.     

论火工装置的抽样试验与可靠性评估问题

对航天器用的火工装置,提出运用序贯检验方法制定其抽样试验方案以及运用贝叶斯方法评定其可靠性的建议。算例表明,文章所提建议适用于解决小子样成败型产品的可靠性设计、试验和验证等问题,对节省产品研制经费有重要意义。