The Kumtag meteorite strewn field

The Kumtag meteorite strewn field was found in the Kumtag desert, 132 km south of Hami city in the Xinjiang province, China. It is an ellipse of 2.5 × 7.9 km, with a long axis extending along the northeast-southwest direction. The largest individual meteorite of the strewn field weighs about 10 kg; the smallest individual has a mass of only 27 g. In total, more than 100 individuals with a total mass of more than 180 kg were collected. The location and the distribution of the fragments suggest that the Kumtag meteoroid entered the atmosphere in the direction Northeast-Southwest. All meteorites collected in this strewn field are samples from the same unique meteorite shower. The Kumtag meteorite is an H5 ordinary chondrite with a shock stage S2, and a weathering grade W2. The cosmic ray exposure age of Kumtag is 6.7 ± 0.8 Ma, which is rather typical for H chondrites and which indicates that Kumtag was derived from the massive impact event on its parent body ~7 Ma ago. A significant amount of He has been lost during certain unknown processe(s) before the Kumtag meteorite was ejected from its parent body.     

纹影技术中光源的选择与设计方法

在纹影技术应用过程中,纹影光源的性能一定程度上决定了拍摄结果的优劣。不同种类的光源,得到的拍摄效果不同,对于某种特定拍摄需求,光源的选择和设计也不同。如何选择和设计合适的纹影光源,对于最终拍摄结果的好坏至关重要。结合纹影技术在工程实际中的应用,分析了不同被测对象对光源的需求,总结了几种常见光源的应用情况及其特点,提供了一种光源参数设计的方法。在实验室典型超声速自由射流流场测量中,对卤钨灯、氙灯和激光3种纹影光源的应用进行了对比分析。所提出的纹影光源的选择与设计方法,具有一定的工程实验参考价值。     

双极性压缩观测光谱成像技术研究

压缩传感突破了 Nyquist-Shannon 采样定理的限制,从随机观测的少量测量值中即可高精度地获取图像,给成像设备的设计带来了巨大变革。压缩传感理论证明可以通过重构恢复获得比焦平面阵列分辨率更高的场景图像。尽管在理论上存在巨大优越性,压缩传感成像系统的物理实现需要考虑一些实际问题。文章围绕压缩传感成像设备进行了研究,提出了一种物理可实现的压缩成像方法,该方法利用双通道观测架构实现压缩成像中的双极性观测,解决了压缩成像理论与实际物理约束不一致的问题。采用多路技术和多膜技术实现大视场观测与多次视场观测,该方法可以单次曝光获取充足的观测值来高精度重构原图像。压缩光谱成像数值仿真实验验证了该方法的有效性和鲁棒性。     

Analytical-HZETRN model for rapid assessment of active magnetic radiation shielding

The use of active radiation shielding designs has the potential to reduce the radiation exposure received by astronauts on deep-space missions at a significantly lower mass penalty than designs utilizing only passive shielding. Unfortunately, the determination of the radiation exposure inside these shielded environments often involves lengthy and computationally intensive Monte Carlo analysis. In order to evaluate the large trade space of design parameters associated with a magnetic radiation shield design, an analytical model was developed for the determination of flux inside a solenoid magnetic field due to the Galactic Cosmic Radiation (GCR) radiation environment. This analytical model was then coupled with NASA’s radiation transport code, HZETRN, to account for the effects of passive/structural shielding mass. The resulting model can rapidly obtain results for a given configuration and can therefore be used to analyze an entire trade space of potential variables in less time than is required for even a single Monte Carlo run. Analyzing this trade space for a solenoid magnetic shield design indicates that active shield bending powers greater than ∼15 Tm and passive/structural shielding thicknesses greater than 40 g/cm² have a limited impact on reducing dose equivalent values. Also, it is shown that higher magnetic field strengths are more effective than thicker magnetic fields at reducing dose equivalent.     

热暴露对IMI834近α高温钛合金组织和拉伸性能的影响

测试了ＩＭＩ８３４高温钛合金在６００～７５０℃的空气中热暴露１００小时后拉伸性能，利用透射电镜和扫描电镜观察了合金暴露前后的组织变化及拉伸断口，认为表面氧化是造成合金热暴露后塑性下降的主要原因，但基体组织内有序α２相和硅化物的析出变化也在不同程度上造居了合金热暴露后的强度和塑性的下降。     

宁强陨石（CV3）稀有气体的研究

宁强陨石的岩石学、矿物学及化学组成的研究表明,宁强陨石属于异常的CV3碳质球粒陨石,稀有气体和宇宙射线暴露年龄的测定结果与岩石学及化学组成的研究结果是一致的,宁强陨石的宇宙射线暴露年龄为42.2Ma,在CV3球粒陨石中是最高的,U/Th-4He及40K-40Ar气体保存年龄分别为4170±160Ma和4260±70Ma,这与碳质球粒陨石的气体保存年龄为4200Ma是一致的.     

激波过弯道绕双圆柱流场

采用单曝光光栅干涉或双曝光光栅干涉，研究激波过弯道绕双圆柱传播的微波流场。采用单曝光法，成功显示入射激波到第一圆柱上的反射、绕射，到达第二圆柱上的反射、绕射。在同一底片上采用双次曝光，第一次脉冲记录直道上的平面波，第二次脉冲记录激渡过弯道绕双圆柱流场。这些照片对于研究反射、绕射及它们边界的相互作用是很有用的。     

束丝SiC纤维增强铝复合材料界面TEM研究

利用透射电镜 (TEM )对由几种不同方法制备的束丝SiC纤维增强铝复合材料 (包括超声液相浸渗法制备的复合丝、由复合丝热压得到的板材以及由真空液相压渗法制备的板材等 )的界面微观特征进行了研究 ,结果显示 ,制造态及 5 5 0℃× 1h热暴露条件下复合材料没有发生界面反应 ,在 6 5 0℃× 1h热暴露条件下有厚度 10 0～2 0 0nm的界面反应区。该研究表明 ,SiC/Al复合材料在制备工艺条件下具有有良好的界面化学相容性     

热暴露对B/Al复合材料性能的影响

对经300℃、500℃高温热暴露的B／Al（LF6）复合材料的力学性能进行了研究，实验结果表明材料在300℃下热暴露时，性能下降速度较慢，100h后强度保留率约为76％，延伸率保留率为74％。而在500℃下热暴露时，5h以上强度就有明显降低。高温长时间热暴露后复合材料的断裂也从积累型转变为典型的非累积型断裂。通过透射电镜（TEM）及扫描电镜（SEM）对固态热压制造态和主温热暴露的界面状况进行了分析，认为界面反应是造成B／Al复合材料力学性能下降的主要原因。     

加速器切线照相技术研究

根据工作实践研究了固体发动机切线照相无损检测中黑度分布、散射线防治、象质计使用、检测概率计算、脱粘临界值确定等技术问题.