Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

拓扑优化方法在航空用钣金零件设计中的应用

为了满足航空产品高载重量及低耗油率的要求,采用拓扑优化技术对航空用钣金零件进行结构优化,实现了钣金零件强度高和重量轻的指标.案例分析表明,在航空用钣金零件初始设计阶段引入拓扑优化方法,会比设计过程中单纯使用结构尺寸优化和形状优化获得更大的经济效益.     

钣金成形信息化发展关键技术

钣金成形广泛应用在航空、汽车、船舶等各个行业,而钣金成形信息化在钣金成形技术中起重要作用.钣金成形信息的存储方式、关联技术、信息规范技术、数据库技术、钣金成形信息共享平台技术、钣金成形信息的获取和利用技术,是钣金成形信息化的关键技术.通过这些关键技术规范钣金成形信息的表达、存储方式,建立完善的钣金成形信息平台,利用数据挖掘技术,为钣金成形技术人员提供钣金成形工艺方案、工艺规程、模具设计需要的充足的信息.钣金成形信息化技术的发展将理顺钣金成形信息的积累和利用,消除信息孤岛,提高钣金成形的整体工艺水平和工艺准备效率.     

解读企业财务"三表"的方法与技巧研究

企业财务“三表”是反映企业家底、经营全貌、发展前景、未来命运的“蓝图”和“家谱”,企业的投资、经营、监督者,只有精于解读,才能正确投资决策、提高企业效益、规避经营风险、实施有效监管。     

交错磁场聚焦带状电子注的研究

带状电子注在均匀磁场作用下传输时,很容易形成Diocotron不稳定性,导致电子注在传输过程中产生逐渐的崩溃。文章采用交错排列的磁堆形成的PCM磁场聚焦半无限带状电子注,分析了PCM磁场聚焦半无限带状注的作用机理,得出半无限带状电子注在PCM磁场作用下的包络方程（Matthieu方程）。结合理论分析,使用三维粒子模拟程序模拟了PCM磁场对半无限带状电子注的聚焦,详细研究了PCM磁场的部分参数对电子注传输的影响,并对模拟结果进行了分析。     

不等边∏型材弧形零件的滚弯成形

介绍了不等边∏型材弧形零件的成形方法，包括滚床的选择、滚模的设计以及工艺问题的解决。     

The large-scale structure of the heliospheric current sheet during the Ulysses epoch

Space Science Reviews - Ulysses is traversing the Sun's polar regions for the first time a year or two before solar minimum. If the heliospheric magnetic field behaves as we expect, the...     

薄板坯连铸结晶器电磁制动的热模拟实验

本文以Sn作为模拟合金，测定了有无电磁制动条件下结晶器的二维速度分布。实验结果表明；电磁制动对于减轻液面波动，改善薄板坯连铸结晶器内的流场有明显效果。此项工作对于板坯连铸结晶器电磁制动器的设计和工艺参数的确定具有一定的参考价值。     

The Cold-Dense Plasma Sheet: A Geotail Perspective

GEOTAIL observations of the low-latitude boundary layer (LLBL) in the tail-flanks show that they are the region where the cold-dense plasma appears with stagnant flow signatures accompanied by bi-directional thermal electrons (< 300 eV). It is concluded from these facts that the tail-LLBL is the site of capturing the cold-dense plasma of the magnetosheath origin on to the closed field lines of the magnetosphere. There are also cases that strongly suggest that the cold-dense plasma entry from the flanks can be significant to fill a substantial part of the magnetotail. In such cases, the cold-dense plasma is not spatially restricted to a layer attached to the magnetopause (that is, the LLBL), but continues to well inside the magnetotail, constituting the cold-dense plasma sheet. Inspired by the fact that these remarkable cases are found for northward interplanetary magnetic field (IMF), a statistical study on the status of the near-Earth plasma sheet is made. The results show that the plasma sheet becomes significantly colder and denser when the northward IMF continues than during southward IMF periods, and that the cold-dense status appears most prominently near the dawn and dusk flanks. These are consistent with the idea that, during northward IMF periods, the supply of cold-dense ions to the near-Earth tail from the flanks dominates over the hot-tenuous ions transported from the distant tail.     

钛合金钣金件脉冲电流辅助热压成形精度控制

针对钛合金钣金件冷加工成形精度低、热成形机成形成本高的问题,提出一种采用脉冲电流辅助热压成形工艺。以TC1钛合金U型件为对象,研究了脉冲电流辅助热压成形工艺对钛合金钣金件的缺陷、尺寸精度及力学性能的影响。结果表明,脉冲电流加热可提高成形效率,当脉冲电流密度为9.2A/mm^2,合模速度为15mm/s时,补偿了成形过程的热量损失,使钛合金钣金件保持在良好的成形温度区间,增加其成形极限,得到零件表面质量良好、无裂纹。在成形过程中,随着成形压力、保压时间、模具预热温度的升高,零件的尺寸精度逐渐提高,当成形压力10t、保压时间10s、模具不预热时,零件的尺寸精度即可达到±0.2mm。脉冲电流辅助热压成形后零件的晶粒尺寸比热成形机成形的细小,且力学性能也较好。